*Stance front/back position
*Stance angles, I was thinking +15/-9
*Heel Strap Location
*Toe Strap Position
Also check that your boot is centered in the binding. Measure from center of binding plate to heel and center of binding plate to toe. Should be within 1/4 or maybe 1/2 inch. If not, adjust heel cup position. And I would do this before you adjust the straps.
Usually, if your boot is centered in the binding, there is less front/back adjustment of the binding on the board.
2008 LibTech Dark 157 with Union Force bindings (mod with Burton toe strap).
2010 Bataleon Green 161 with Rome Targa bindings.
2007 Palmer Pulse 162
2011 Ride Insano boots w/ redhot Superfeet insoles
Stance +15/-15 @ 24"