Snowboarding Forum - Snowboard Enthusiast Forums - View Single Post - Lobster Freestyle 2012/2013 Board review
View Single Post
Old 11-29-2012, 05:30 PM   #1 (permalink)
CheoSamad
Veteran Member
 
CheoSamad's Avatar
 
Join Date: Nov 2011
Location: Henryville PA
Posts: 548
Default Lobster Freestyle 2012/2013 Board review

I figured I would do a quick review on my new board for this year.
We will be talking about the Lobster Freestyle 2012/13

Specs-I am riding the 152 cm version (Burton Missions Bindings). The board has a medium to stiff flex, and a cambered profile, with Triple Base Tech.

(if you don't know what triple base is I suggest watching this video https://vimeo.com/26479625 and checking out this web page Lobster Snowboards)

Initial thoughts- This was the first board I have ever ridden that had Triple Base Tech (Or TBT) Also keep in mind this was my first day riding in over 8 months.
The first few runs made me feel a bit rusty as I got adjusted to TBT. On a normal board when you carve you feel your edge immediately bite into the snow, however on this there is this feeling of "rolling" onto my edges. The first few runs I would wash out as I tried to bite my edge in and would end up leaning too far and slipping onto my knees/back.
Once I was adjusted carving felt better than it ever has. It makes the board feel much more loose, and "floaty" when I am free riding it. Even with this TBT the board remains very responsive and can maneuver as well as any board I have ridden.
The board also has a lot of pop due to it's flex pattern and camber. This made it a lot of fun to just hop around doing flat ground 180's ect.

After getting adjusted I took the board to the park. This is where the board really shines!
(Our local hill did not have any jumps set up, so I will be updating this thread when I can speak on how the board handles off of kickers.)
The pop is excellent for getting onto taller rails without much effort. You would think TBT would make 50-50's and presses harder but after shaking off the rust they felt as locked in as ever.
My personal favorite part, was how the board handled on perpendicular slides. Frontside and Backside boardslides in the center of the board (With the rail in between the bindings) felt normal. When I started doing slides on my nose, and tails, I could really feel the TBT.
On a normal shaped board when sliding through features sideways you have to be extremely careful to stay flat based. While on this board you still have to keep your base flat, I personally felt as though the TBT lifting my edges away from the rail helps to avoid catching. It made it easier to learn a few new tricks that you have to spin into (like cab 270 front board 270 out on a flat box) The TBT really helps add a jib element to the board and brings the package around full circle for me.

If mother nature agrees with me this year, I will also update this thread on how the board preforms in powder. I imagine the TBT will make all the difference when riding in the white stuff.

Please leave thoughts in the comments. This is my first board review so criticize away, whether it be on content, or structure ect.
__________________
Emerica should make snowboard boots

CheoSamad is offline   Reply With Quote