Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Bindings (http://www.snowboardingforum.com/bindings/)
-   -   Binding screws coming loose (http://www.snowboardingforum.com/bindings/131618-binding-screws-coming-loose.html)

DToay34 02-28-2014 11:33 PM

Binding screws coming loose
 
I check my binding screws fairly regularly, but today was only a three hour day for me and my screws were loose by the end! I'm pretty sure, another run or two and my back binding may have popped right off my board. I obviously re-tightened them when I learned they were loose, but I don't understand how they could have came loose so quickly...bad screws? Not tight enough to being with? I don't know what's going on, so I thought I'd throw it out to you guys and see if any of you have had similar issues or solutions to this problem.

Dmilkman 02-28-2014 11:54 PM

I had this issue after repositioning my bindings back on the board. The next couple of times I went out they started to loosen up. It's not the screws, man up and give it a nice torque brah.

D

snowklinger 03-01-2014 12:01 AM

2 things:

-metal or plastic disc? If metal, this is pretty normal as you have all these intolerant components heating and cooling, wiggling is guaranteed. If plastic discs, you should be able to crank enuf to overcome the loosening.

-put a drop of clear nail polish in the inserts before you tighten; credit: AngrySnowboarder, the BurtonAvenger.

I have had both kinds of bindings, problems, and solutions.

DToay34 03-01-2014 12:16 AM

Thanks guys. They are plastic so I'll make sure to crank them down pretty good and try the nail polish trick.

speedjason 03-01-2014 12:20 AM

some blue locktite.

2hipp4u 03-01-2014 12:21 AM

Blue thread lock is a little less ghetto.

speedjason 03-01-2014 09:38 PM

man this happend to me today. I put the bindings on my board at home last night 70F. today it was below 10F and the screws became loose.:huh: gonna start bringing my tools.

snowklinger 03-02-2014 01:12 AM

Quote:

Originally Posted by 2hipp4u (Post 1580210)
Blue thread lock is ghetto.

fixed4u




.

2hipp4u 03-02-2014 02:39 AM

Hood bitches be all up in polish on a board.

chomps1211 03-02-2014 06:15 AM

Are these bindings by any chance reflex Cartel's? (...or any kind of Burton reflex binding?)
I had this happen to me with my Med. reflex's when I mounted them on my wide board! (...actually had a screw rolling around loose under the foot pad when I opened it!!!) I know the disk insert for them is supposed to "flex" and I thought maybe with the bindings being too small really for a wide board that the extra effort and leverage used to edge that wide board caused them to flex right out of the inserts.

I might be wrong about why that happened, but I also know that I am totally OCD about keeping my binding screws tight, so I know "I" didn't fuck up and forget to tighten them. :dunno:


All times are GMT -5. The time now is 03:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2