Snowboarding Forum - Snowboard Enthusiast Forums banner

Got a board and bindings...but I'm missing something

21K views 4 replies 4 participants last post by  Murphopotamus 
#1 ·
Hi everyone this past winter was my first season snowboarding and I was using my brothers board and setup I loved it so much that I just purchased a 2013 Burton 154cm Sherlock, and 2014 Burton EST Customs bindings.

2014 Custom EST Snowboard Binding | Burton Snowboards

I purchased the board online and the bindings in store at a skipro. After getting the board I found out it was a display model (I got a good price, I'm fine with it) and the bindings I got were also the display model (also a good price) but ski pro had the box and the other binding was still in it.

When I went ahead to put them together I found out I was missing the channel screw holes..The metal piece that goes in the Burton channel that you screw your bindings into.

What I'm asking is...who "screwed" me over haha I'm not sure if they were supposed to come with the bindings or with the board or if they're "Burton sold separately"

Any input provided would be appreciated!! If you have any questions feel free to ask :)
 
See less See more
#2 · (Edited)
The inserts are supplied with the board, the binders will have screws in the box.

If you don't have either you got screwed by both stores.

Any burton dealer should be able to fix you up, often they'll give out those parts for free, especially if you buy something else in the same visit, which I usually do when I go into a shop. (No willpower).
 
#4 ·
I thought I had this same issue when I bought a sample board with no inserts. Burton will send them for you for free if you call them within a few days. Piece of cake. Of course as it turns out when I tipped the shipping box that the board came in on it's end guess what plunked out in a nice little plastic bag :)
 
#5 ·
Hi everyone this past winter was my first season snowboarding and I was using my brothers board and setup I loved it so much that I just purchased a 2013 Burton 154cm Sherlock, and 2014 Burton EST Customs bindings.

2014 Custom EST Snowboard Binding | Burton Snowboards

I purchased the board online and the bindings in store at a skipro. After getting the board I found out it was a display model (I got a good price, I'm fine with it) and the bindings I got were also the display model (also a good price) but ski pro had the box and the other binding was still in it.

When I went ahead to put them together I found out I was missing the channel screw holes..The metal piece that goes in the Burton channel that you screw your bindings into.

What I'm asking is...who "screwed" me over haha I'm not sure if they were supposed to come with the bindings or with the board or if they're "Burton sold separately"

Any input provided would be appreciated!! If you have any questions feel free to ask :)
Bought my Custom 156, straight from Burton site... no inserts with the deck and only half of the hardware with the bindings... derp.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top