burton uninc and rome 390s? - Snowboarding Forum

mesomike · 01-31-2010, 11:54 PM

I have an 07 uninc right now with my rome 390's mounted to it with the 2x disc that burton provides. This setup works fine. I want to get an 09 uninc with the ics and still be able to use the 390's. Does anyone know if I can mount them on the ics board with the burton provided hardware? I know some say you cant do it even on the board I have, but it works fine so I was hoping it would work on the new board too. Need help fast to make a purchase. Thanks guys.

Deviant · 02-01-2010, 01:27 AM

I wasn't aware the retro-disk would work on 390's but that's cool to hear.

The channel hasn't changed yet (not till 2011 or so I've heard) so it should work the same as the 07. Even when it does change I would assume they still give you the female-end hardware with the board like they did back then.

mesomike · 02-01-2010, 03:27 AM

The 07 that the disc work for my 390's on is not a channel system. It is just the 2x holes, just 2 bolts hold the binding on instead of 4.

01-31-2010, 11:54 PM	#1 (permalink)
mesomike Senior Member Join Date: Mar 2008 Posts: 142	burton uninc and rome 390s? I have an 07 uninc right now with my rome 390's mounted to it with the 2x disc that burton provides. This setup works fine. I want to get an 09 uninc with the ics and still be able to use the 390's. Does anyone know if I can mount them on the ics board with the burton provided hardware? I know some say you cant do it even on the board I have, but it works fine so I was hoping it would work on the new board too. Need help fast to make a purchase. Thanks guys.

02-01-2010, 01:27 AM	#2 (permalink)
Deviant Veteran Member Join Date: Dec 2009 Posts: 1,658	I wasn't aware the retro-disk would work on 390's but that's cool to hear. The channel hasn't changed yet (not till 2011 or so I've heard) so it should work the same as the 07. Even when it does change I would assume they still give you the female-end hardware with the board like they did back then. Last edited by Deviant; 02-01-2010 at 01:28 AM. Reason: edited my 2am spelling

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2010, 03:27 AM	#3 (permalink)
mesomike Senior Member Join Date: Mar 2008 Posts: 142	The 07 that the disc work for my 390's on is not a channel system. It is just the 2x holes, just 2 bolts hold the binding on instead of 4.