Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Bindings (http://www.snowboardingforum.com/bindings/)
-   -   Repair cut in binding material (http://www.snowboardingforum.com/bindings/35983-repair-cut-binding-material.html)

fredericp64 01-17-2011 11:04 AM

Repair cut in binding material
 
Hey there, I have a cut in my Burton Cartel heel strap. Must have happened while on the chairlift.

Tried to fix it with Shoe-goo cause it was worth a try but the results are negatory.

Any tips? (That gunk is the Shoe-goo and will come off easy if I scratch it btw.)


Thx!!

http://farm6.static.flickr.com/5009/...de900b97_z.jpg

http://farm6.static.flickr.com/5168/...3c2c9732_z.jpg

http://farm6.static.flickr.com/5203/...5d3dedea_z.jpg

CoopersTroopers 01-17-2011 11:58 AM

Is that just on the ankle strap fabric/leather? I doubt it's going to cause any functional problem, but if you're concerned that it might get bigger, I'd guess you either need to sew it up, or cover it with a patch (like someone would to fix mend a leather chair or jacket. Cheap but ugly solution: duct tape?

Shoo-Goo is really for gluing rubber back against rubber.

DrnknZag 01-17-2011 02:35 PM

Superglue!

EagleTalons 01-17-2011 02:46 PM

Use fletching epoxy. I used some on my atv seat and it has held out in the weather for 5 months now.

ryninger 01-19-2011 05:45 AM

Look into a product called TEAR-AID Repair Products you can get it off ebay or amazon. I have used it quite a bit with good success. Everything from 4-wheeler seats to surgical tables. It is good stuff!

surfinsnow 01-19-2011 10:39 AM

Gorilla Glue. The stuff is awesome. I had a ding in my edge which caused the deck to delam a little bit. Gorilla Glue (and a heavy weight to keep the shit from expanding too much) and let it set overnight, scrape off the excess. Never had another issue with it. I even used the shit on my boot when a seam separated...applied the glue with a toothpick into the seam, then wrapped it tight in duct tape over wax paper (so I could remove it easy). It held up pretty damned well, but eventually I had to re-glue it a couple of times. Stuff is awesome, but BEWARE...it expands like crazy. If you don't clamp it or weight it down somehow, it could actually push apart the repair.


All times are GMT -5. The time now is 09:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2