Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Bindings (http://www.snowboardingforum.com/bindings/)
-   -   Ride Highlife UL 163w which bindings (http://www.snowboardingforum.com/bindings/67241-ride-highlife-ul-163w-bindings.html)

j1nftw1n 02-19-2013 02:31 AM

Ride Highlife UL 163w which bindings
 
Hey yalls

Recently picked up a new ride highlife ul board 163w (STIFFY). I feel like a new pair of stiffer and lighter bindings would compliment the light board very well. Currently running on 2006 Burton Cartels but one of the lean adjusters on the boot is starting to jack up on me. Was considering the Union Charger or the Burton Diodes. Would love to hear what the experts here have to say.

:yahoo:

DrEwTiMe 02-19-2013 02:43 AM

I gotta say even though I haven't ridden them yet the Union SL's I picked up are just about the best thing since sliced bread according to opinions in this forum and all over the Internet. Would go perfect with the UL but if I remember right they are not quite as stuff as the diodes, and frankly if you have the cash and really want they super aggressive response the diodes are a pretty serious binding! Rides El Hefe would be another good choice and also what ride them selves suggests using with that board.

P.s- excuse any ridiculous spelling or grammar this was written on my cell phone lol.

Mr_Tidbit 02-19-2013 10:41 AM

Bindings are really a personal preference thing... Many companies may market certain bindings with certain boards... but the fact is you can ride any bindings on any board if it fits your flex preferences. You say you feel like something stiffer and lighter.. is that compared to the Cartel or just in general?

SJ10 02-19-2013 11:24 AM

I run reflex C02s on my 163w. I also have diode ests on my t6 and would say they're similar in feel. Honestly you'll be good with either I just happen to prefer Burton.

One thing I would look at however is your stance width. The reflex disk is somewhat limited in options compared to a more standard disk. I'd like to have 1/4" movement or finer instead of 1/2" movement with my reflex bindings.

Nivek 02-19-2013 04:52 PM

Flux DMCC, Flow NX2 RS, Ride Capo, or K2 Companies.

atr3yu 02-19-2013 05:16 PM

Re: Ride Highlife UL 163w which bindings
 
Quote:

Originally Posted by Nivek (Post 744666)
Flux DMCC, Flow NX2 RS, Ride Capo, or K2 Companies.

I have ridden the capos and dmcc light this year and if I had to pick I would be on the flux for sure.

scotty100 02-19-2013 08:30 PM

Quote:

Originally Posted by atr3yu (Post 744858)
I have ridden the capos and dmcc light this year and if I had to pick I would be on the flux for sure.

What makes the flux better than the Capo for something like the highlife? I thought it would be a softer binding?

atr3yu 02-19-2013 08:47 PM

Re: Ride Highlife UL 163w which bindings
 
Quote:

Originally Posted by scotty100 (Post 745402)
What makes the flux better than the Capo for something like the highlife? I thought it would be a softer binding?

I found them more than responsive enough, but that's for me. Also comfort, they are like riding in air. I really can't tell that they are there. Its like my boots are part of my board. I much prefer them over that capos.

j1nftw1n 02-19-2013 08:58 PM

Some very nice suggestions so far thanks everyone, I will be doing some due diligence to dial it in on the perfect binding for my setup.

Mr Tidbit your def right bindings def are a personal preference, although my choice of board rite now is the ride highlife there currently isnt a binding in the ride line that would suit my preference. I'm an intermediate free rider thats looking for comfort and control in a sleek lite weight package (no frills or fancy color ways if preferable) to replace my mid flex burton cartel which is more of a freestyle/all mountain binding.

I was at REI hoping to check out the Burtion Diode but they were solds out ggop. They did have the burton malavita in stock, burton rates it a 6/10 on stiffness but i think its def stiffer than (id say 7/10) other bindings in the same bracket such as the mission and cartels. The malavita it feels like a very solid binding. The base plate is covered with a cushy eva pad and has bubble pockets in them, kinda reminds me of them ol skool nike and reeboks from back in the early 80's. I would imagine this would be a really comfortable ride and will cut down on a lot of chatter. The highback are not as high as the cartels but was noticeably stiffer. I also checked out the Union Contact Pro (designed by gigi ruff), was not as impressed with the build quality and although rated 7/10 by Union they were not as stiff as imagined.

The quest continues :eusa_clap:

scotty100 02-19-2013 08:59 PM

Quote:

Originally Posted by atr3yu (Post 745442)
I found them more than responsive enough, but that's for me. Also comfort, they are like riding in air. I really can't tell that they are there. Its like my boots are part of my board. I much prefer them over that capos.

Interesting, I'm looking at both these bindings right now and tempted by the DMCC but worried they won't be responsive enough for the likes of the highlife. I was thinking the SF45 would have been the more obvious option from flux.

What boots do you wear with the DMCC? I also heard with reduced footprint boots the fit with the flux can seem a little loose at the sides...they look awesome though. I'd buy them from dogfunk and if they didn't work out they'll take them back anytime.


All times are GMT -5. The time now is 12:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2