Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Boards (http://www.snowboardingforum.com/boards/)
-   -   Is my board defective? (http://www.snowboardingforum.com/boards/112177-my-board-defective.html)

Madbob14 12-16-2013 06:38 PM

Is my board defective?
 
3 Attachment(s)
I have the one magtek and it seems a little flat? Attached are the images.

There is almost no camber between the bindings? It's suppose to be a rocker shape

Thanks!

tanscrazydaisy 12-16-2013 08:42 PM

Google will tell you the answer.

then you click the first link from Rossignol... and lo and behold... your answer!!!

Madbob14 12-16-2013 09:05 PM

I guess it is my fault for putting a question mark at the end of the sentence. I know it's suppose to be a rocker but the shape on the pics don't seem like it.

From what I see, the board is very flat and there is no camber profile between the bindings/rocker area.

tanscrazydaisy 12-16-2013 09:16 PM

Quote:

Originally Posted by Madbob14 (Post 1345497)
I guess it is my fault for putting a question mark at the end of the sentence. I know it's suppose to be a rocker but the shape on the pics don't seem like it.

From what I see, the board is very flat and there is no camber profile between the bindings/rocker area.

http://www.snowboardingforum.com/boa...g-between.html

Madbob14 12-16-2013 09:19 PM

I'm a bit confused by what you are saying....the shape is a rocker camber rocker which I already know what it is.

I'm asking about the board in the pictures as there is almost no camber in between the bindings........

ekb18c 12-16-2013 09:25 PM

From your second picture there looks like there is some camber between the bindings. Hard to tell really from that angle.

BurtonAvenger 12-16-2013 09:36 PM

What model is it? They have three versions. There's a 20%, 40%, and 60% camber. This changes how it looks. Now if you're referring to camber height that's a whole different issue, but there is generally a +/- 2mm difference in every board due to the factory it's coming out of.

Madbob14 12-16-2013 09:36 PM

There is very little camber profile on the board. It is basically raised like 1mm. It's almost non existent.

I'm just wondering to the other one magtek owners if their boards are like this or if their camber profile is more noticeable?

Madbob14 12-16-2013 09:38 PM

Quote:

Originally Posted by BurtonAvenger (Post 1345593)
What model is it? They have three versions. There's a 20%, 40%, and 60% camber. This changes how it looks. Now if you're referring to camber height that's a whole different issue, but there is generally a +/- 2mm difference in every board due to the factory it's coming out of.



The board is a 2013 Rossignol One Magtek 154cm. The rossignol website doesnt state what % camber the one magtek is.

I guess I am referring to the camber height as there is almost none on the board. It's basically raised 1mm.

BurtonAvenger 12-16-2013 09:47 PM

This wasn't too hard to find. It's a 60% Rocker 40% camber mix. This will play into the camber height.

Innovations ROSSIGNOL : ski, snowboard, ski boots, helmet, goggle, outerwear


All times are GMT -5. The time now is 12:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2