Anybody had this problem? Binding holes not aligned - Snowboarding Forum

01-08-2009, 12:17 AM

I recently picked up a new board (Burton Mayhem), and went with the default stance width for the first day out. When I got back in, I wanted to widen the stance by an inch, but the holes on on the board were slightly off from the holes on the binding plate (Burton 3D).

The default width was fine with the 3-hole configuration, but none of the 4-hole configurations lined up correctly.

Anyone had or heard of this problem before? I'm thinking of bringing the board to the local shop and seeing if they have some other discs that might fit better. Any thoughts?

-pgroove

Dawg Catcher · 01-08-2009, 12:34 AM

try flipping it so its unidisk setup works fine on all teh boards i have had burton missions on

01-08-2009, 01:08 AM

I'm having this same issue with getting my Nitro Raiden 0's onto my new Burton Deuce. I have called every person in the tri-state area, and no one has these adapters if they do know what I'm talking about.

Sent an e-mail to Nitro, no response yet.
Gonna call Burton tomorrow, and hope for the best.

Super frustrating...
Anyone that can refer me to a shop close to NYC who has them for sure or reputable online dealer I'd appreciate it much!

arsenic0 · 01-08-2009, 02:18 AM

Looks like you have the Universal disc..have you tried rotating that disc 90 degree's? So your mounting with the plate holes sideways not up and down?

Triple8Sol · 01-08-2009, 03:26 AM

It's not really helpful to your problem, but this is precisely why I've boycotted Burton boards since day 1.

01-08-2009, 02:19 PM

Thanks everyone. I've tried spinning the discs every which direction, switching them between bindings--no dice! I called the store I got it from and they said to bring it down and they will figure something out for it.

Hopefully they have some other discs that will fit it better. Since the problem is only with the 4-hole pattern, I think something like this should work.

Extremo · 01-08-2009, 02:32 PM

Just don't buy burton. There are plenty of worthy alternatives out there. And they're not trying dueche bags about using other brands with their products.

chowman94 · 01-08-2009, 03:10 PM

i have the same disc also. if sometimes if one way doesnt work, you have to turn it all the way around 180 degrees and then the holes will fit. Thats how i solved my problems

laz167 · 01-08-2009, 05:26 PM

I had a similiar problem last year.. I bought some Technine bindings for my girls burton board and no fit. What the shop guy did was drill the baseplate holes biggier, it worked.

Penguin · 01-08-2009, 05:42 PM

Quote:

Originally Posted by Extremo

Just don't buy burton. There are plenty of worthy alternatives out there. And they're not trying dueche bags about using other brands with their products.

Kinda too late for that advice, hahahaha

01-08-2009, 02:18 AM	#4 (permalink)
arsenic0 Veteran Member Join Date: Nov 2008 Location: Hillsboro, Oregon Posts: 2,106	Looks like you have the Universal disc..have you tried rotating that disc 90 degree's? So your mounting with the plate holes sideways not up and down? __________________ '09 151 Never Summer SL-R '10 K2 T1 DB Bots '09 Burton Cartel Bindings

01-08-2009, 03:26 AM	#5 (permalink)
Triple8Sol Veteran Member Join Date: Nov 2008 Location: Seattle Posts: 3,686 Blog Entries: 1	It's not really helpful to your problem, but this is precisely why I've boycotted Burton boards since day 1. __________________ 14 NeverSummer Proto HD . 13 Never Summer Cobra . 12 Gnu Rider's Choice C2PTX 14 Now Drive . 13 Now IPO 13 NB x 686 580

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-08-2009, 12:34 AM	#2 (permalink)
Dawg Catcher Senior Member Join Date: Jan 2009 Location: Back to Arizona Posts: 915	try flipping it so its unidisk setup works fine on all teh boards i have had burton missions on

01-08-2009, 01:08 AM	#3 (permalink)
Milos Guest Posts: n/a	I'm having this same issue with getting my Nitro Raiden 0's onto my new Burton Deuce. I have called every person in the tri-state area, and no one has these adapters if they do know what I'm talking about. Sent an e-mail to Nitro, no response yet. Gonna call Burton tomorrow, and hope for the best. Super frustrating... Anyone that can refer me to a shop close to NYC who has them for sure or reputable online dealer I'd appreciate it much!

01-08-2009, 02:19 PM	#6 (permalink)
pgroove Guest Posts: n/a	Thanks everyone. I've tried spinning the discs every which direction, switching them between bindings--no dice! I called the store I got it from and they said to bring it down and they will figure something out for it. Hopefully they have some other discs that will fit it better. Since the problem is only with the 4-hole pattern, I think something like this should work.

01-08-2009, 02:32 PM	#7 (permalink)
Extremo -LIFETIME MEMBER- Join Date: Nov 2008 Location: NH Posts: 3,121	Just don't buy burton. There are plenty of worthy alternatives out there. And they're not trying dueche bags about using other brands with their products.

01-08-2009, 03:10 PM	#8 (permalink)
chowman94 Member Join Date: Dec 2008 Posts: 55	i have the same disc also. if sometimes if one way doesnt work, you have to turn it all the way around 180 degrees and then the holes will fit. Thats how i solved my problems

01-08-2009, 05:26 PM	#9 (permalink)
laz167 Senior Member Join Date: Nov 2007 Location: Northern Jersey Posts: 950	I had a similiar problem last year.. I bought some Technine bindings for my girls burton board and no fit. What the shop guy did was drill the baseplate holes biggier, it worked.