Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Boards (http://www.snowboardingforum.com/boards/)
-   -   Repair Gouge in top (http://www.snowboardingforum.com/boards/117865-repair-gouge-top.html)

CMCM 01-07-2014 07:59 PM

Repair Gouge in top
 
Hi,
I have a couple spots on the top edge of my board, above the metal. that have some small gouges- not exactly sure, but one might go past the top layer of plastic. None are more than half an inch long.
There are also some other spots with tiny nicks, and I would like to fill them so that water does not creep into the spaces.

I have searched and I find several techniques for the bottom, but is it safe to just fill the top gouges with superglue or something similar? I have seen superglue dissolve some materials, so I am just checking if this is okay.

If not, what product can I use for small gouges like this?

Thanks in advance

Poop 01-07-2014 08:03 PM

can you upload some pictures??

timmytard 01-07-2014 08:03 PM

Caulk


TT

zoom111 01-07-2014 08:04 PM

A picture is worth 1000 words... a 2 part epoxy will most likely hold up longer than glue and can be sanded smooth after it cures to smooth it out and blend into the contour. If there's a small patch that's separating then put some epoxy in the crack and squeeze it shut with a small c-clamp.

CMCM 01-07-2014 08:15 PM

1 Attachment(s)
This is the worst one. Not that big, I know, but I just wanted to check anyway.

zoom111 01-07-2014 08:18 PM

Just use a decent 2 part epoxy like jb weld marine and build the shape back up to mesh into the contour of the board. You can sand it with sandpaper to make it smooth and fine tune it. Overlap the unaffected area slightly so it becomes one with the board.

jdang307 01-07-2014 08:19 PM

Epoxy. Search the forum and you'll find instructions/techniques.

Poop 01-07-2014 08:20 PM

i would just leave at it is

speedjason 01-07-2014 08:25 PM

just ride it. it will be fine.

Poop 01-07-2014 08:28 PM

your only gonna get more as you ride


All times are GMT -5. The time now is 11:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2