Snowboarding Forum - Snowboard Enthusiast Forums

Snowboarding Forum - Snowboard Enthusiast Forums (http://www.snowboardingforum.com/forum.php)
-   Boards (http://www.snowboardingforum.com/boards/)
-   -   152 Sub Zero Owners i need help! (http://www.snowboardingforum.com/boards/25292-152-sub-zero-owners-i-need.html)

twin89 02-18-2010 07:31 PM

152 Sub Zero Owners i need help!
 
ok, so i am currently in the market for a super soft park board (ideally the subzero) and i am worried that the 152 may be a little narrow for my bindings (L/XL union Contact SLs). I have gone to all my local dealers of nitro and none of them have the board so i can't measure how wide the board is my self.

What i am asking of you sub pop owners is kinda a lot, but i was wondering if you could measure the width of your board (inches or cm) at the 24 inch stance mark and post up how wide it is.

I am just worried i am going to have binding over hang cause they currently have the toe ramp at the smallest setting and fit just perfectly on the edges of my 148 capita stairmaster. i would be really grateful, o let me know if you measured on the base of your board or the top sheet of your board.

Thanks in advance to anyone that replies!

twin89 02-19-2010 06:00 PM

bumpity =)

FLuiD 02-19-2010 06:01 PM

Ask Nivek he has one. I sent mine back on warranty because of the inserts... Nitro was sooooo helpful, lol.

twin89 02-19-2010 06:03 PM

yeah, haha this thread is directed towards him lol, what may i ask was wrong with your inserts? as i am about to buy one and would like to avoid problems hehe

skatebanana101 02-19-2010 06:03 PM

considering the fact that the waist width is 246 mm on the 152, it's not looking good

FLuiD 02-19-2010 06:06 PM

I had the Sub Pop which was the early release of the Sub Zero. The inserts were not drilled center but were actually set forward about an inch. See thread here - http://www.snowboardingforum.com/boa...=nitro+inserts

twin89 02-19-2010 06:19 PM

Quote:

Originally Posted by skatebanana101 (Post 259411)
considering the fact that the waist width is 246 mm on the 152, it's not looking good

yeah, but you have to take into consideration that the sidecut radius is really small, which makes it narrow at the WW and wider at the inserts so it may actually come out to be close to my stairmaster.

Quote:

Originally Posted by FLuiD (Post 259413)
I had the Sub Pop which was the early release of the Sub Zero. The inserts were not drilled center but were actually set forward about an inch. See thread here - http://www.snowboardingforum.com/boa...=nitro+inserts

thanks, yeah if i get one its prob gona be the subzero so i don't have to deal with that problem

FLuiD 02-19-2010 06:26 PM

Quote:

Originally Posted by twin89 (Post 259420)
yeah, but you have to take into consideration that the sidecut radius is really small, which makes it narrow at the WW and wider at the inserts so it may actually come out to be close to my stairmaster.



thanks, yeah if i get one its prob gona be the subzero so i don't have to deal with that problem


I would confirm that they fixed it for sure! ;)

BTW...I rode Forum Republic L/XL bindings with size 11 Northwave boots on my 152 Sub Pop and it was fine....23" stance, 15/-15.

twin89 02-19-2010 06:29 PM

Quote:

Originally Posted by FLuiD (Post 259425)
I would confirm that they fixed it for sure! ;)

BTW...I rode Forum Republic L/XL bindings with size 11 Northwave boots on my 152 Sub Pop and it was fine....23" stance, 15/-15.

Thanks so much =)

Nivek 02-20-2010 01:50 AM

Didn't realize this was here too =)

L/XL from Union will be fine on it in the 152. Thats the size my friend is riding, about 22.5in wide and 15/-15, and he has zero problems.


All times are GMT -5. The time now is 05:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2