Bindings wont fit on board. - Snowboarding Forum - Snowboard Enthusiast Forums
SnowboardingForum.com is the premier Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 12-22-2007, 09:17 PM   #1 (permalink)
"7aYLo.Mad3"
Guest
 
Posts: n/a
Default Bindings wont fit on board.

Alright well i just bought a new Burton Clash today, and i swapped my technine bindings off my old board, but now i cant get all 4 bolts to line up to screw the bindings to the board... i can only get 1 on the rear and one bolt on the front... your supposed to have 4 bolts per binding... so what do i do? i tried to move the center peice around to make it work but it seems to be off just a bit.. do i need a burton binding? which i would rather not! or do i get a adapter thing that would allow me to make this work? i have no idea why it dont and its pissing me off... i gotta get out and rip this new board.
  Reply With Quote
Sponsored Links
Advertisement
 
Old 12-22-2007, 09:32 PM   #2 (permalink)
Senior Member
 
Grimdog's Avatar
 
Join Date: Oct 2007
Location: Alberta, Canada
Posts: 780
Default

Sound like you need to change to the discs that work with the Burton insert pattern. Go to the shop that you bought your Technine bindings from and they should have some.
Grimdog is offline   Reply With Quote
Old 12-22-2007, 09:35 PM   #3 (permalink)
"7aYLo.Mad3"
Guest
 
Posts: n/a
Default

i got the technines a few years ago... not from around here, but i think someone around here should carry them. or can i just get a burton disk that will work in the bindings? cause im planning a day trip in like a week... and i dont want to be riding with 2 bolts per binding.... kiiiinda sketchyYo.
  Reply With Quote
Old 12-22-2007, 09:42 PM   #4 (permalink)
Senior Member
 
Grimdog's Avatar
 
Join Date: Oct 2007
Location: Alberta, Canada
Posts: 780
Default

You could try an actual burton disc. It may be the same diameter as the technine discs. That does suck though. When I bought my Technines, they came with 4x2 and Burton discs.
Grimdog is offline   Reply With Quote
Old 12-22-2007, 10:12 PM   #5 (permalink)
"7aYLo.Mad3"
Guest
 
Posts: n/a
Default

k well imma go to the store where i got the board tomoro and see what they got, hopefully i can sort that shit out.
  Reply With Quote
Old 12-22-2007, 10:13 PM   #6 (permalink)
BoardTard Xtrordinair
 
Mr. Right's Avatar
 
Join Date: Sep 2007
Location: Colorado
Posts: 1,476
Default

I bought actual Burton disks that work fine with my Rides and they worked with my old Agency bindings as well. Technine might make Burton plates that fit so I'd check with them. You now have the "elitist" curse of doom that comes standard with every Burton binding pattern.
Mr. Right is offline   Reply With Quote
Old 12-22-2007, 10:13 PM   #7 (permalink)
"7aYLo.Mad3"
Guest
 
Posts: n/a
Default

for the picture whor3s.


  Reply With Quote
Old 12-22-2007, 10:15 PM   #8 (permalink)
"7aYLo.Mad3"
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Mr. Right
I bought actual Burton disks that work fine with my Rides and they worked with my old Agency bindings as well. Technine might make Burton plates that fit so I'd check with them. You now have the "elitist" curse of doom that comes standard with every Burton binding pattern.
wish i would have known before hand... guess its a good way for people buying a burton board to buy matching bindings... i never liked my burton bindings thou.

oh well its not a big deal... my old atlantis worked fine with the technines.
  Reply With Quote
Old 12-22-2007, 10:51 PM   #9 (permalink)
Moderator
 
boarderaholic's Avatar
 
Join Date: Aug 2007
Location: Edmonton
Posts: 2,659
Default

Call up Technine and ask for a set of plates...
boarderaholic is offline   Reply With Quote
Old 12-23-2007, 11:17 AM   #10 (permalink)
elbarto
Guest
 
Posts: n/a
Default

If you can go exchange your board, i'd say thats your best bet but if you cant try just putting the 2 bolts that you can and see if it stays.. My friend did that and it worked perfecly!
  Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 11:25 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2
VerticalSports
Baseball Forum Golf Forum Boxing Forum Snowmobile Forum
Basketball Forum Soccer Forum MMA Forum PWC Forum
Football Forum Cricket Forum Wrestling Forum ATV Forum
Hockey Forum Volleyball Forum Paintball Forum Snowboarding Forum
Tennis Forum Rugby Forums Lacrosse Forum Skiing Forums