Quick fix go grab some 2 part epoxy mix it with more resin than hardener so it's softer once it dries. Slather it in good on the separation of the sidewall and hit it with a heatgun/blow driver then put more on it cover with duct tape for 24 hours and let it dry. Peel the duct tape off take a metal scraper or razor blade and clean the excess and go ride.
Proper repair take a razor knife cut the bulged part of the base out. Take an awl and put it in there and hit it with a hammer bending the edge back to the proper position. Epoxy sidewall and base area let it dry for 24 hours then base weld/fill the cut out section with ptex. Good thing is it's a NS their edges actually bend back easiest out of any board I've ever done. I've probably fixed 20 or 30 of those over the last few years. Bad news nothing really the god damn thing is built like a sherman tank.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Because someone has to call it how they see it!