custom graphics? - Snowboarding Forum

blunted_nose · 10-01-2012, 01:16 PM

Is there a place that would print 2006 Burton custom graphics on a newer board like a Mervin? I dig that graphics so much but its really hard to find.

david_z · 10-01-2012, 01:53 PM

pretty sureyou'd be running afoul of all sorts of copyright law... Mervin undoubtedly wouldn't do this for you but there are some websites i've seen before that do custom print full wraps for snowboards, you have to supply the graphic file for them though.

BurtonAvenger · 10-01-2012, 02:28 PM

Ugh the level of stupid never ceases to amaze me.

bseracka · 10-01-2012, 02:39 PM

Everytime I read one of your posts all I hear is circus music in my head and get the desire to slap the stupid out of you. Get yourself a snowboard from Blank and draw the graphic on there yourself with some tracing paper, or buy a Delorean hit 88mph go back to 2006 and buy the board you want. You clearly don't deserve a quality board.

blunted_nose · 10-01-2012, 03:38 PM

Quote:

Originally Posted by bseracka

Everytime I read one of your posts all I hear is circus music in my head and get the desire to slap the stupid out of you. Get yourself a snowboard from Blank and draw the graphic on there yourself with some tracing paper, or buy a Delorean hit 88mph go back to 2006 and buy the board you want. You clearly don't deserve a quality board.

Thanks for copying BurtonAvenger, now stop commenting on shit. How would a 2006 board be now? i know the tech came a long way but it wouldn't be that bad right?

BurtonAvenger · 10-01-2012, 03:52 PM

Do us all a favor before you post anything ever again sit down and think about it long and hard, then when you think you have your response and are about to type it out think about how we will mock you yet again, after that get up, shut the lap top, walk outside, and go play in traffic.

Rookie09 · 10-01-2012, 03:53 PM

You'll be able to make it down the hill if that's what you're wondering. Assuming it's in good condition, it will still keep you from progressing and be absolutely nothing compared to new boards.

BurtonAvenger · 10-01-2012, 06:05 PM

Quote:

Originally Posted by Rookie09

You'll be able to make it down the hill if that's what you're wondering. Assuming it's in good condition, it will still keep you from progressing and be absolutely nothing compared to new boards.

Let me guess you're the guy that blames camber for not being able to press a snowboard too? Right?

Where do you dumb fucks come from?

blunted_nose · 10-01-2012, 06:26 PM

Quote:

Originally Posted by BurtonAvenger

Let me guess you're the guy that blames camber for not being able to press a snowboard too? Right?

Where do you dumb fucks come from?

He said nothing of that sort. Maybe your the dumb fuck here, after all being angry 24/7 cant be too good for you? Right? Make us a favor and just gulp down as many anti-depressant pills as you can.

alaric · 10-01-2012, 06:31 PM

Quote:

Originally Posted by Rookie09

You'll be able to make it down the hill if that's what you're wondering. Assuming it's in good condition, it will still keep you from progressing and be absolutely nothing compared to new boards.

Are you serious? If you can't preform nearly the same on an older board than a newer board, it's not the boards fault.

Quote:

Originally Posted by BurtonAvenger

Let me guess you're the guy that blames camber for not being able to press a snowboard too? Right?

Where do you dumb fucks come from?

Gotta agree with BA, as usual. Just cause he's angry it doesn't mean he's dumb.

10-01-2012, 01:16 PM	#1 (permalink)
blunted_nose Veteran Member Join Date: Apr 2012 Posts: 862	custom graphics? Is there a place that would print 2006 Burton custom graphics on a newer board like a Mervin? I dig that graphics so much but its really hard to find.

10-01-2012, 01:53 PM	#2 (permalink)
david_z Official SBF Blogger Join Date: Dec 2009 Location: Detroit suburbs Posts: 3,027 Blog Entries: 5	pretty sureyou'd be running afoul of all sorts of copyright law... Mervin undoubtedly wouldn't do this for you but there are some websites i've seen before that do custom print full wraps for snowboards, you have to supply the graphic file for them though. __________________ Repping the world's smallest mountains... Mt. Holly - 12 Pine Knob - 9 Alpine Valley - 2 Vail - 4 Breckenridge - 3 Crystal Mountain (MI) - 3 Hawk Island Snow Park - 5 Caberfae Peaks - 1 Boyne Mountain - 1 aGNARchy: no rules, just gnar!

10-01-2012, 02:28 PM	#3 (permalink)
BurtonAvenger Veteran Member Join Date: Aug 2007 Location: Mountains Posts: 8,021	Ugh the level of stupid never ceases to amaze me. __________________ Angry Snowboarder Because someone has to call it how they see it!

10-01-2012, 03:52 PM	#6 (permalink)
BurtonAvenger Veteran Member Join Date: Aug 2007 Location: Mountains Posts: 8,021	Do us all a favor before you post anything ever again sit down and think about it long and hard, then when you think you have your response and are about to type it out think about how we will mock you yet again, after that get up, shut the lap top, walk outside, and go play in traffic. __________________ Angry Snowboarder Because someone has to call it how they see it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-01-2012, 02:39 PM	#4 (permalink)
bseracka Veteran Member Join Date: Nov 2011 Location: Seattle, WA Posts: 590	Everytime I read one of your posts all I hear is circus music in my head and get the desire to slap the stupid out of you. Get yourself a snowboard from Blank and draw the graphic on there yourself with some tracing paper, or buy a Delorean hit 88mph go back to 2006 and buy the board you want. You clearly don't deserve a quality board.

10-01-2012, 03:53 PM	#7 (permalink)
Rookie09 Senior Member Join Date: Sep 2012 Location: Minneapolis Posts: 282	You'll be able to make it down the hill if that's what you're wondering. Assuming it's in good condition, it will still keep you from progressing and be absolutely nothing compared to new boards.