Snowboarding Forum - Snowboard Enthusiast Forums banner

Proto VS SL - the NS company email reply

3K views 14 replies 8 participants last post by  hktrdr 
#1 ·
Hello all. I emailed NS regarding some specific questions I had about the SL and Proto. I started a thread about it initially and put this email in the thread but I though the email had good info in it and some might not read the reply in the thread so I figured the info was worthy of it's own thread since there are like 5 active threads about the Proto and SL (why not make a 6th? lol)

anyhow I'm just sharing info. They replied in less than an hour =Very nice.


__________________
MY ORIGINAL EMAIL...

Hello! I have a few questions that I was unable to locate answers for online.The Proto: Is it a TRUE TWIN? It states it is on the website but some of the reviews I read state that it is Directional twin with regards to flex pattern.

The SL - (a) Are the shape and sidecut twin? (b) what about flex pattern? I have read that if you shift the bindings forward the SL is essentially true twin, however if the sidecut is NOT true twin, it would not become a true twin if I slid the binding forward to a cantered stance.

Im getting one or the other for sure - cant make up my mind :)

thank you!

________________
THE NS REPLY......


Hi Marc,

The Proto CT is a true twin in every way, sidecuts, flex patterns, and binding stance. The SL is a directional twin, so it has symmetrical sidecuts and flex patterns with the binding stance slightly set back. If you move the bindings forward, you will get a ride like that of a true twin. Hope this helps!

Thanks for the support of NS!
 
See less See more
#2 ·
That is typical NS customer service.
Quick response time? Check
Detailed and clear answer? Not so much...

The stuff about the Proto is all correct, but the bit on the SL requires clarification/correction: The SL is directional because the inserts have setback and also because the sidecut has setback. So just centering the bindings does not make it a true twin.
 
#9 ·
The SL is a directional twin, so it has symmetrical sidecuts and flex patterns with the binding stance slightly set back. If you move the bindings forward, you will get a ride like that of a true twin. Hope this helps!
They are always quick to respond over there. I got the same response about the heritage

The Heritage is also directional, but has symmetrical sidecuts and flex patterns, making it able to be ridden like a twin if the bindings are slightly set forward on the board.
 
#10 ·
Yeah, they are quick to respond - just wish that they were clearer what they mean by 'symmetrical'/more accurate. Like the SL the Heritage (and the Legacy, and the Cobra,...) the sidecut itself is symmetrical, but the board itself is not (even disregarding the binding position) - because the sidecut is setback.
Consequently, unlike the Proto these boards do not become true twins when the bindings are centered on the board.
 
#14 ·
Out of curiosity I emailed them.

Hi Joe,

The sidecut on the SL will not be setback, but the bindings will be setback by about 0.5". If you move the bindings forward, you will get a ride like that of a true twin.

Thanks for the support of NS!

Never Summer Industries
5077 Colorado Blvd
Denver, CO 80216
Phone (303) 320-1813
Fax (303) 320-0771
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top