|Topic Review (Newest First)|
|01-19-2014 11:35 PM|
|Lowlyffe||I would imagine so. Another added layer of protection couldnt hurt. I didnt but only because I didnt have any on hand at the time.|
|01-19-2014 08:50 AM|
|LightninSVT||Would it help to spray it with a clear coat when you're done?|
|01-18-2014 10:28 PM|
Im no expert by any stretch but I cleaned the binding thoroughly, then buffed with a fine steel wool. I only did two coats. Lasted a season and a half before a box dinged the heel. I just buffed and reapplied.
I know you have probably heard this many times but proper spraying distance is key to making it look factory. This is usually beyond the scope of most novice painter's patience. It's a slow process to spray from distance but any closer your paint will run.
I let the paint cure for over a week.
|01-18-2014 05:46 PM|
Originally Posted by Lowlyffe View Post
|01-18-2014 04:57 PM|
|Lowlyffe||I have had good luck with Krylon Fusion. It'll last a good long while, but will still eventually chip. Its the best option Im aware of. When you paint it make sure you let it cure for a week or so for best chip resistance.|
|01-18-2014 02:10 PM|
Experience painting bindings?
Anyone have first hand experience painting their bindings? I have a couple pair of C02's, one in white with the red backing, and don't like the red. I taped it off and painted black last night with Plasti Dip in flat black. It looks good, think that's the direction I'm going to go, but it's not going to hold up. I can tell this will easily peel off after several uses. Love the look, but wanted some recommendations on what paint to use. I'm assuming some auto paint will work best, that can be used on plastics......
Any tips appreciated.....