|Topic Review (Newest First)|
|03-12-2014 04:41 PM|
|Snowrax||I like using teflon tape.|
|03-12-2014 03:51 PM|
Originally Posted by Booo! View Post
|03-12-2014 12:11 PM|
Originally Posted by UNION INHOUSE View Post
|03-12-2014 12:03 PM|
Originally Posted by Mason View Post
If you do go the Loctite route, put it on the screws only, and allow to dry completely before remounting. Loctite will destroy your disk. Very important.
As posted above, I wouldn't suggest using nail polish either. Keep any and all chemicals away from your disks. If you want a quick and easy fix, put toothpaste on your screws. It won't last as long as Loctite, but provides enough friction to keep them from loosening.
Check all your hardware before you shred.
|03-12-2014 01:04 AM|
|suchislife||If you don't want to buy a tube of loctite for one screw a bit of nail polish will do almost the same thing. Just put some on the bolt and screw it in, leave for 24hrs to dry.|
|03-12-2014 01:01 AM|
|NWBoarder||Cold temps and a bunch of vibrations and pressure on the screw. Loosening is not uncommon. Put a little bit of blue loc-tite on it and you should be good to go.|
|03-12-2014 12:40 AM|
Help with getting a binding screw to stay tight?
One of my bindings is repeatedly coming loose for no reason and Im not sure why it is. The part I'm talking about it one of the screws in the disc that holds it to the board (sorry, not great with terminology of the parts). It's not coming loose enough to shift the binding around but enough that I can feel it slightly. Does anyone know a fix or why this might be happening?