|Topic Review (Newest First)|
|04-07-2014 05:48 PM|
Originally Posted by Slush Puppie View Post
|04-07-2014 05:41 PM|
|Slush Puppie||As a good guide, make a fist but bend your fingers at the 2nd knuckle. You should be able to just fit this and your elbow between the binding heal cups, with unto a few cm space.|
|04-07-2014 12:16 PM|
Now go ride! it's awesome
|04-07-2014 02:38 AM|
Thanks for your thoughts, everyone. Gives me some perspective on things.
F1EA, thanks for reminding me of that. I did try strapping in and it felt natural in the closest width I could get to what I was shooting for. I'm gonna go with this for now and adjust if I need to.
|04-06-2014 09:02 PM|
Measuring, standard online advice, anything done with a calculator.... mean nothing until you strap in and stand on your board.
So try that first and foremost. If you feel you're standing to straight/stiff, the stance may be too narrow. If you feel you're doing a van damme split... your stance is too wide. Most of the people i see struggling on the hill have a stance that's too narrow......
|04-06-2014 08:22 PM|
|thatkidwho||I'm your height and slightly lighter and ride a 156 with a 22in stance. Set them bindings at the reference marks, strap in and test the stance. Narrow as needed.|
|04-06-2014 07:56 PM|
Hmm. I have a Gnu Carbon Credit 153 which has a weight range of 100 - 180+. I'm right in the middle at 145. I'm short, but not that short at 5' 4". The min stance says 20.25". Am I that far off from this board's intended rider?
I'm a beginner rider with no preferences yet. But this is my board for now so I'm gonna have to make it work with the narrowest setup I can get.
I tried turning the binding disc 90 degrees to get side to side adjustment but I don't think it can be installed this way. Can all binding discs do this? If so, this would help. EDIT: Just found out that these can't. Oh well.
|04-06-2014 04:39 PM|
|04-06-2014 03:58 PM|
|td.1000||stance width depends on your height and snowboard size depends on your weight. if you're not tall but heavy this might happen. you might be able to get them a bit closer together by playing with the minidisks, otherwise you'll need a different board|
|04-06-2014 03:27 PM|
Binding width setup question
Setting up my first board and have a stupid question.
I measured my stance width to be about 19" - 20" which agrees with most standard advice for my height I've found online. But when placing my bindings at the inside or innermost holes on the board, it still measures about 21.5" from the center of the bindings.
Is this the narrowest it can go? Seems like I'm overlooking something. Any ideas?
Sent from Verticalsports.com Free App