|Topic Review (Newest First)|
|12-23-2011 12:52 PM|
|linvillegorge||I just throw the wax on and a do a quick scrape. I get all the excess off and don't worry about polishing and buffing and all that. That stuff will make a difference for the first couple of runs at best. Just not worth the added effort IMO.|
|12-23-2011 12:42 PM|
i know some old timer skiers who say if you use the proper amount of wax and prefer to spend more time drinking beer and chasing women, just leave the "peanut butter" on (no scrape). the first 100 feet will suck, but then gravity and friction take over.
not saying i do it, but if i get better at waxing i prolly will.
prolly not a great idea on a powder day either but i forgot what those are.
|12-23-2011 08:29 AM|
Originally Posted by Clarion View Post
|12-23-2011 08:12 AM|
I waxed my board 3 times now. The first time I did it was when I purchased it back in September. I put alot of wax on like you did and looked like your photos. Last weekend, I broke her virginity but holy cow I was scraping FOREVER the night before! Gave her a buff and brush after all that scraping and regretted putting that much wax on.
After the first day of riding, I noticed only the edges (at most, one inch along either side) needed waxing. You could still feel the smoothness of the wax everywhere else. So that night I decided to only wax the edges.
Since I was riding junk from rain the day before frozen overnight, mixed with man made stuff, I decided not to scrap off the fresh wax along the edges. After the first run, the junk I was riding had removed the wax and left the edges pretty smooth. Again, at the end of the day only the edges needed waxing and I could still feel the smoothness everywhere else from 2 nights prior.
So in conclusion, depending on what you are riding, you may not need to scrap. For me, I have decided the only times I am going to scrap is for hot waxing and if I visit a real mountain that has that magical stuff called pow. I'm going to let the hard pack mini ice chunks junk crud do the scraping for me.
|12-23-2011 06:52 AM|
|IslandCrow||If you use a metal scraper, one little hint is to take a dremel and round out the edges of the scraper so you don't accidentally gouge your board if you're not paying attention.|
|12-22-2011 12:09 AM|
|jyuen||i used to use a drywall scraper, started using the plexi scrapers recently. i find they are actually harder you can scrape with a lot more pressure using the hard plastic scrapers|
|12-21-2011 11:34 PM|
|Tech420||Are you fucking serious?|
|12-21-2011 11:04 PM|
Originally Posted by linvillegorge View Post
|12-21-2011 10:55 PM|
|grafta||Used to use metal scraper with that shitty one ball jay biogreen. Now using some softer wax and the piece of plexi I grabbed from work is doing great. Depends how hard the wax is you are using really.|
|12-21-2011 10:52 PM|
Originally Posted by Nefarious View Post
|This thread has more than 10 replies. Click here to review the whole thread.|