|Topic Review (Newest First)|
|04-04-2013 01:35 PM|
Originally Posted by Casual View Post
|04-04-2013 01:32 PM|
|Atoxa||Another problem is that I can't find any flat metal strips that are wider than 2 in. If I use the angle Irons, all I want to know is whether they would slide or if I would catch. If not I think they are the best option for a 3 in. wide|
|04-04-2013 08:49 AM|
Yeah, countersinking metal is super easy. I have my screws sitting a 1/16 of an inch below the surface. No hang ups at all.
I'd recommend skipping the HDPE and getting UHMW Poly instead. HDPE gets really dry and slow. UHMW is a little more expensive but it's slick and durable. Mine's 1/4" thick. You'll have to round the edges and make sure your edges are completely detuned and rounded over because you'll def catch if they're square.
|04-03-2013 11:47 PM|
Countersink with a drill bit and the screw will be flush if you do it right, just google how to countersink metal and I'm sure you will find something, super easy.
I thinkk trex would get chewed up pretty bad.
See if you can find 3/16" HDPE from a local plastics supplier. Might be cheaper than steel, definitely easier to work with and will slide better. Not sure about the corners of the rail though.
|04-03-2013 09:32 PM|
|Atoxa||How would trex work on the top of a rail? Anyone have experience?|
|04-03-2013 11:21 AM|
|Atoxa||What I need is a 3 in. wide, 1/4th in. thick one of these: Crown Bolt 2 in. x 36 in. Plain Steel C-Channel Bar with 1/8 in. Thick-32070 at The Home Depot|
|04-03-2013 11:18 AM|
Originally Posted by Extremo View Post
|04-03-2013 11:17 AM|
|Atoxa||Casual, I definitely would, but the issue is my lack of a welder, I don't know how else to put legs on those things. Welders are really expensive too...|
|04-03-2013 10:36 AM|
Why not just get a 2x4" square rail? something like these.
|04-03-2013 05:19 AM|
|Extremo||Countersink and screw it in. I use flat bar for the sides of my box. Angle irons aren't square through the bend so when you lay them on you have to screw them in from the top anyways. If you screw them in from the sides it'll push the tops up as it tightens.|
|This thread has more than 10 replies. Click here to review the whole thread.|