|Topic Review (Newest First)|
|01-07-2014 09:47 PM|
|njfastlfie||In for later|
|01-07-2014 09:16 PM|
|zoom111||A regular gummi stone will be fine. Just run it flat along the edges to remove small burrs or run it at a 45 degree if theres a small "hanging burr".|
|01-07-2014 09:09 PM|
Thanks, yea I think I'm going to avoid sharpening my edges or at least sharpening them myself.
In terms of deburring or just getting some of the nicks of my edges.. seems like a pretty easy process. Anyone have any suggestions of which stone or whatever to use. I don't need it to be perfect but is there one stone or whatever I could use just to clean up the edges?
|01-07-2014 09:00 PM|
I think you've pretty much got it covered with the base and edge maintenance. Sharpening is personal preference and condition/board dependent. Rarely sharpen my magnetraction for example even though I'm on the ice coast.
Now if your looking to keep your board all "pristine" then you have some options
-lay a film over the top sheet to protect from small nicks, scratches and scuffs.
-stainless or nylon "grub" screws to protect your unused inserts
|01-07-2014 08:41 PM|
Thanks man yea thats what I've been doing over the years just been wondering if there was some other simple things I could do.
|01-07-2014 05:26 PM|
I personally just hot wax and ride. Ptex when I get a big gouge. Once in a while ill use one of those gummy stones to clean things up a bit. Seems to work fine for me.
If you plan on messing with the edges, make sure you know exactly what you're doing. You can screw it up pretty easily.
|01-07-2014 02:37 PM|
Board Maintenance Questions
Hi all, new to the forums and have a few board maintenance questions.
So I consider myself a pretty "advanced" rider but for whatever reason I have never really immersed myself in snowboarding and really don't know all that much other than the basics about board maintenance. Last year I finally ponied up for a nice board and would like to keep this beauty for as long as possible. So what are the few basic things I should be doing on a yearly basis gearing up for the new season?
Unfortunately last year I did a bunch of NJ/PA riding and it took a pretty good toll on my board. So in the past I've never really touched my edges and just kept them dull because I used to do a lot of park riding. But moving forward I will probably do most of my riding this year in Vermont / Colorado groomed / ungroomed type of stuff not in the park.
So my thoughts are that I should 1) at least deburr the edges cause I do have a lot of burrs.
2) "Hot scrape" the board since I heard base cleaners can be harmful to the base
3) hot wax regularly
and then for 4) I'm still unsure whether I should sharpen my edges or not. I've heard arguments on this and many other forums for both.
oh and also probably going to buy a P-tex candle for some base repair.
Sorry for the long winded post but any and all help would be greatly appreciated