|Topic Review (Newest First)|
|03-26-2014 10:51 AM|
Originally Posted by Lamps View Post
It is going to be something that is hard to deal with from here, and certainly not in time to get some more snow with only 2 or 3 weeks left...
|03-26-2014 10:47 AM|
What size board do you ride...??? I may have a board you can borrow for the rest of the winter...
With Flow 5 bindings already attached...
|03-26-2014 09:48 AM|
I don't know the Nitro answer but I have boards with both the new channel and the older channel and have interchanged the mounting hardware, which maybe I shouldn't but it hasn't been a problem.
The channel got wider and the mounts changed in shape.
Customer Service M6 | Burton Snowboards
the link above takes you to a webpage that burton has put together, which if you follow it through it will tell you to call nitro, which might not be helpful, as you already know that.
you might also call burton rider services and ask about this.
here is page with info:
Burton Binding Compatibility
I think that the key to your problem is that the earlier channel hardware had a screw head with a wider body and a flat head rather than countersunk head. You might have to drill out the plate if the holes are too small, and also have the non countersinking issue to contend with if you can't get a plate to fit the m5 system.
I suspect that if you went to a shop and had a look at the plate for the new channel you could determine whether it could be altered if there isn't an M5 specific plate available.
Hope this helps.
|03-26-2014 09:22 AM|
|ItchEtrigR||Ok, how bout this question, does Nitro make a minidisc compatible with the older ICS Channel?|
|03-19-2014 03:54 PM|
New bindings on older burton channel
I broke a highback on my older burton triads, I'm looking at new bindings like the Nitro Phantoms or K2 Formulas but am unsure whether their plates will fit on my 2010 Burton Operator with the older burton channel, am I stuck with EST and non reflex burton bindings & EST plate adapters?