|Topic Review (Newest First)|
|12-13-2010 02:59 PM|
as a waxing beginner, you might be jumping the gun a bit with the stones. The kit already comes with one good enough to de-bur.
...instead, I'd invest in a full size nylon bristle brush (the brush included in the kit is "travel size"). This brush wisks the last bit of wax out of the base structure at the very end of a wax job. I reccommend buying one the same coarse stifness as the the one that comes included (there are finer nylon brushes, but they're kinda advanced for racers)
|12-13-2010 04:18 AM|
Alright, so here is the list so far...
Get edges done at shop
So, my follow up question is if I should get a diamond stone or gummy stone, what is the difference between them, and if I should get coarse/medium/or fine? Oh, and the edges I should get a 1-2 degree max on both base and side for a all mountain rider correct?
|12-12-2010 12:08 PM|
with all due respect (snowolf's videos first convinced me I could hot wax at home), not everyone will quickly get to the proficiency of being able to use a metal scraper for wax. Yeah, it's faster, but the metal scraper is originally in the kit to scrape off the excess p-tex mounds when filling gouges/core shots (and to shield the base from unwanted melted p-tex). Frequent use of this aggressive scraper for wax jobs, by novices such as us, can prematurely deplete the structure.
The 3 in 1 tool is used to sharpen the edge only after the burs have been removed/sanded with the included whetstone. These burs are too hard and will dull the shallow file on the tool. Eventually, you will sharpen away enough metal that the sidewall will start getting in the way - that's when you put the deep/panzar file in the tool and shave the sidewall flush to the metal. Like the metal scraper, the panzar file is too aggressive to use first (I learned that the hard way).
buying a brass brush was also snowolf's influence...I can't imagine not having one. I use it only to prep the base for waxing - it gets a lot of the old dirty wax out of the structure. I think it's a bit too aggressive for a final brushing (I use a stiff nylon brush for that)...but I'm a relative novice.
|12-12-2010 04:31 AM|
Alright so I have decided upon the T4B Kit, thanks for all the help so far guys. Much appreciated
On a side note, do you guys think it would be worth it to purchase a full sized brass brush along with the kit and what is your guys opinions on the 3-1 tools?
|12-12-2010 02:46 AM|
Originally Posted by --bigtime-- View Post
|12-11-2010 09:21 PM|
Originally Posted by MistahTaki View Post
I personally use Birthday Cake Candles and my dad's credit card. Boom, done!
|12-11-2010 12:29 PM|
Originally Posted by Xenth View Post
|12-11-2010 11:36 AM|
|extra0||^I hope you're kidding|
|12-11-2010 01:26 AM|
but really, all you need is a candle and your drivers license.
|12-11-2010 01:17 AM|
|Lstarrasl||You guys are nuts. $6 Iron at Target, done. Turn to medium. Wax board, scrape, Ride.|
|This thread has more than 10 replies. Click here to review the whole thread.|