|Topic Review (Newest First)|
|01-19-2011 11:39 AM|
|surfinsnow||Gorilla Glue. The stuff is awesome. I had a ding in my edge which caused the deck to delam a little bit. Gorilla Glue (and a heavy weight to keep the shit from expanding too much) and let it set overnight, scrape off the excess. Never had another issue with it. I even used the shit on my boot when a seam separated...applied the glue with a toothpick into the seam, then wrapped it tight in duct tape over wax paper (so I could remove it easy). It held up pretty damned well, but eventually I had to re-glue it a couple of times. Stuff is awesome, but BEWARE...it expands like crazy. If you don't clamp it or weight it down somehow, it could actually push apart the repair.|
|01-19-2011 06:45 AM|
|ryninger||Look into a product called TEAR-AID Repair Products you can get it off ebay or amazon. I have used it quite a bit with good success. Everything from 4-wheeler seats to surgical tables. It is good stuff!|
|01-17-2011 03:46 PM|
|EagleTalons||Use fletching epoxy. I used some on my atv seat and it has held out in the weather for 5 months now.|
|01-17-2011 03:35 PM|
|01-17-2011 12:58 PM|
Is that just on the ankle strap fabric/leather? I doubt it's going to cause any functional problem, but if you're concerned that it might get bigger, I'd guess you either need to sew it up, or cover it with a patch (like someone would to fix mend a leather chair or jacket. Cheap but ugly solution: duct tape?
Shoo-Goo is really for gluing rubber back against rubber.
|01-17-2011 12:04 PM|
Repair cut in binding material
Hey there, I have a cut in my Burton Cartel heel strap. Must have happened while on the chairlift.
Tried to fix it with Shoe-goo cause it was worth a try but the results are negatory.
Any tips? (That gunk is the Shoe-goo and will come off easy if I scratch it btw.)