|Topic Review (Newest First)|
|03-09-2012 11:31 PM|
|srdeo||I just watched them. I think there are somethings he should do different. I think swix videos are more accurate and more professional(the way they wax). Swix videos give some different methods of waxing too (and how to wax different types of wax). Swix is one of the top wax company so they know how to apply different wax.|
|03-09-2012 04:03 PM|
Originally Posted by srdeo View Post
|03-09-2012 08:00 AM|
i would stick to plastic scraper. Metal ones removes base material which you dont want to do.
Go to swix.com they have alot of GOOD videos that shows you to sharpen and wax PROPERLY.
Most of the videos on youtube is completely crap. Stick to how swix does it. They have different levels of waxing from recreational to racers. You can use good rub ons/ spray ons on your base(extruded). There isnt a huge difference between rub ons and hot waxing on EXTRUDED bases. On sintered bases there is a huge difference but i am pretty sure you have extruded bases. And get waxing iron. DO NOT USE CLOTHING IRON!!!! it is very easy to burn your bases as well as loosening up resins that are used to hold different layers of snowboard and inserts. And make sure you remove bindings everytime you wax.
|03-09-2012 03:08 AM|
I'd suggest to start with an all-temp wax. I've only recently gone to temp specific wax. The brand could be up to you. I wasn't sure which brand I wanted to use, that's why I'm trying them all out. I get a small block, use it, then move to a different brand. Eventually I'll find one I like the best. Besides most of the small blocks, regardless of brand, are in the $8 - $10 range
Any plexiglass will work. Metal scrapers are easier and will reduce the effort of scraping. I used my plexiglass scraper the first 5 or 6 wax jobs, til I got comfortable with waxing boards, then moved to the metal.
Flatbase riding will come along with more practice too. I wasn't able to do it very well until I really got a good feel for my board, and how to apply pressure in various ways for the things I was trying to do.
|03-09-2012 01:23 AM|
thanks very much guys! will def try that higher angle thing because when i arrive on "small" big airs, due to me not being good at flat riding, i arrive at a slight angle on the jump :/ and as for wax, does any type of wax work for me as im not very experienced and might not get benefits from higher end grades of wax like pros like you guys would get?
and also, watching snowolf wax videos, he advised to start out with a plastic scraper as its more forgiving than metal ones, does any square pieces of pleksiglass work fine ? soz for all them questions
|03-08-2012 07:06 PM|
You can go to any SKI shop or discount outlet to buy iron scraper and wax. I am sure empire sells them online and i think they are based in quebec. I am not sure what you mean by "scratches on snow" but i am sure its not wax related.
Quebec's so icy you still go fast even without wax. And rub on wax works pretty good on extruded bases.
As far as riding flat is that it is difficult initially but you will get hang of it. Using higher angle on front binding helps so try 18 degree on the front binding. And ride more relaxed it will help you with not catching an edge.
Riding flat is really necessary to hit jumps rails etc so keep working on it
|03-08-2012 06:14 PM|
My wax kit consists of a $10 iron from a drugstore, some wax, a scraper and a brush. That's pretty much all you need, unless you're into tuning and such. You can get all that from your local stores for around $30 and you don't need to worry about shipping.
If you really want a kit, look here for Canadian online stores: http://www.snowboardingforum.com/boa...e-tailers.html
|03-08-2012 05:57 PM|
Originally Posted by Basti View Post
Originally Posted by Zombaco View Post
|03-08-2012 02:16 PM|
It's definitely a money saver in the long run to wax and tune your own board, and it's really easy to do. The links in this thread have great do it yourself info on board maintenance: http://www.snowboardingforum.com/tip...ce-videos.html If you don't like those, there's a quite a few board tuning / waxing vids on you tube. There's other threads in the tips, tricks & instructors section with more specifics on waxing and tuning as well (like plexiglass vs. metal scrapers, etc.).
I personally use the Dakine Super Tune Kit, gave me everything I needed. For wax I can't say how the Hertel performs, as I haven't used it yet, but I've been working my way through trying every brand to see what I like best. Dakine, Swix, and Toko have been ok. My favorite so far has been a combo of One Ball Jay 4WD Cold and Black Magic Graphite. I'll probably move onto Hertel or some other brand after those bars are used up. I favor supporting your local shop even if it's priced a bit more than online retailers, but I would think there's has to be some online Canadian retailers so you don't have the import shipping high cost, if you go that route.
I don't have many tricks down yet, but I started doing straight airs on small to medium jumps (throwing in shifty's and 180s occasionally the last couple times out) and 50-50 boxes this season. Most of this season I've focused on starting to do true carving, riding switch and in the trees (when there's enough snow). But trick progression is entirely up to what you want to do. There's a lot of resources out there to help you learn most everything- Snowboard Addiction covers a ton freestyle tricks (they have a few up on youtube as well), and the tips, tricks & instructors section in this forum has a ton of useful info as well. Post a vid of your riding in that section and people will give you tips on what to work on, how to do things. etc.
And yes, right foot in front is goofy.
|03-08-2012 02:11 PM|
Welcome to the forums.
As for riding advice: Do yourself a favor and invest in snowboard lessons. Instructors can see directly what you're doing wrong and teach you how to avoid mistakes. Once you get used to a wrong technique, it is very difficult to lose it. You will enjoy snowboarding so much more!
As for waxing: I wouldn't worry about that too much. Waxing is important when you go faster but in the beginner's stage it doesn't make that much of a difference. If your board is really dry, have it waxed at the resort. It's usually not as perfect as a hand wax but in your case I'd rather save than money for lessons.
|This thread has more than 10 replies. Click here to review the whole thread.|