|Topic Review (Newest First)|
|03-14-2012 06:12 PM|
Originally Posted by wrathfuldeity View Post
|03-14-2012 03:12 AM|
ahhh...did you notice this ^ ...not shaping with planer or table saw
|03-14-2012 12:17 AM|
|03-13-2012 10:13 PM|
Originally Posted by boarderaholic View Post
|03-13-2012 11:46 AM|
|boarderaholic||www.silverfishlongboarding.com if you want more info. There's SO much information out there, take the time to google your questions.|
|03-13-2012 04:26 AM|
Idk...not a longboarder nor skater...but usually to get the concave/camber with wood it is done with steaming and glue up on a jig and will also depend on the cut of the wood...face vs qtr sawn. Most decks are a glue up epoxy lam that is probably done with a press/jig or a vacume clamp/jig. I'd imagine with pine and if you used regular white wood glue it will likely snap and will not hold up to the flexing. I've made a couple of hack decks for the kids using scrap bamboo flooring, old garage door parts and old trucks/wheels found at a garage sale for $1. The one on the left is a 42 x 8" heavy battle ram that runs pretty smooth, doesn't handle curbs and will take out sizable animals for roadkill.
|03-12-2012 05:12 PM|
DIY Longboard Advice
I am planning on learning to longboard this summer , and I need advice from anybody with decent experience with building their own longboards and such. I am currently building a longboard out of strips of pine glued together that was being used as a shelf rack. I cut it to 42" long by 8.5 wide and it is a little under 3/4in thick, it is fairly flexible and seems very solid. But i advice if it should be concaved or cambered, etc. I also want to know what would be a good shape to go with and what wheels and trucks i should get? any advice would be appreciated.