|Topic Review (Newest First)|
|04-20-2012 04:57 PM|
go with the large.
If they are similar, I bought Burton Malavitas in medium on a 7.5 reduced footprint boot. Fit perfectly which is weird because I had all settings in the middle.
|04-17-2012 10:36 PM|
|ETM||10.5 thirtytwo's in L burton bindings here.|
|04-17-2012 10:35 PM|
|AJHXXXIII||I have large malavitas with my Nikes ZF1 size 10's and they fit fine (just a little bit of gap on wither side of my boot when strapped in. No big deal though). I also have medium shakas and they are nice and snug. Either way I have never had a problem. But I would probably go mediums with burton boots with the shrinkage tech if you have them.|
|04-17-2012 10:27 PM|
Originally Posted by Sick-Pow View Post
|04-17-2012 10:22 PM|
MED all the way with Burton boots if the bindings are a newer model ( less than 2-3 years old).
Another boot brand, who knows, but you should try them out.
MED still work up to size 11 FYI.
MED are almost too big for my 9.0 Salomon boots.
I would never want bindings too big....gaps are not too good.
|04-17-2012 09:05 PM|
|Frankyis4||Pretty much what everyone said above. Get the larges. You'll be kicking yourself if the binding is to small. My friend was using an old non burton boot that was size 10 on my burton malavitas and he had no problems.|
|04-17-2012 08:48 PM|
|extra0||you're gonna be hating it if you have to struggle to get the straps ratcheted around the boots. I'd go with the Large bindings|
|04-16-2012 02:36 PM|
|bcasey||I ride size 10 burton boots with large burton bindings. Like previous guy said.. I would rather crank them down on a smaller setting than fight with the last 5 or so notches on the ladders. I only have a little space on each side of my boot though... make sure your width is good. Too much width in your binding will cause your boot to rotate a bit when riding hard or worse.. boot may hop up onto the side of the baseplate. Take your boots to the shop where you buy your gear and try them out (preferably mounted onto a board so you can abuse them a bit.. or try a friends if possible)|
|04-16-2012 01:13 PM|
I'd say the opposite and get the larges. I'd rather have a binding that works at it's smallest settings versus one that you'd have to max out all the settings. I bet with larges you won't even be at the smallest settings, definitely not if you have a non-burton boot, or a burton boot without shrinkage tech.
With mediums, your straps will be at their longest along with the footbed, and you'll have to use the disks in the one way that adjusts toe/heel drag, meaning you can't use the micro-adjustments of the burton disks when in the tail/nose orientation and are stuck with less options when adjusting your stance. You may also have to deal with getting your foot in and out perfectly when strapping in/out if the binding is TOO SNUG with a medium binding.
|04-16-2012 01:03 PM|
|smboarder||Go with the mediums. I have 10s on Mission Burtons Mediums.|
|This thread has more than 10 replies. Click here to review the whole thread.|