|Topic Review (Newest First)|
|11-27-2012 03:30 AM|
|handscreate||Go for it! I started tuning my board myself last season & haven't looked back. The 1st time I went super slow, but after that it's been pretty quick & the ability to wax/tune whenever needed (such as riding slush & destroying the wax job done the day before) is pretty priceless. That brick of wax will go a long way!|
|11-24-2012 08:32 PM|
Originally Posted by apayne1233 View Post
Originally Posted by OutdoorFreak97 View Post
I had a killer day at Lake Louise today so I'm FUCKING STOKED! Pardon me everybody. It's past my beer time.
|11-24-2012 08:20 PM|
|apayne1233||Ive heard and read many "arguments" about using a cloths iron, I'm still undecided what I want to do. Why do you say not to use one? Everybody has different experiences.|
|11-24-2012 07:25 PM|
Yup, glad to help
When I said iron, I mean an actual wax iron, don't use the old ladies clothing iron unless your planing on sleeping on the couch
I used a wax block, not bees wax
Get ski/snowboard wax!
Just make sure when your applying the wax you evenly do it on the board, if you get bumps of wax all over the board, don't worry the iron will melt them down
You don't want to have any low spots either, look at the board under good light and see if you have any
If you do, wait for the wax the harden and fill the hole with wax and iron and scrap it.
After you get-ER-done, go shred some gnar!!
|11-24-2012 07:13 PM|
|apayne1233||Thanks OutdoorFreak, never really looked at just doing that to start out with, defiantly will help me!|
|11-24-2012 07:07 PM|
get an iron
get yourself a cabinet scraper
get some wax
And simply give it a try!
Like was said before, you shouldn't be able to damage the board unless you leave the iron on it to long.
If you don't like the wax job, scrap it off and repeat!
|11-24-2012 06:48 PM|
|apayne1233||Another ? Is it worth it to tune my own board? I'm not planning on riding to much so would only bring it into shop like once a year. And I'm really don't want to spend any more money on snowboarding right now....|
|11-24-2012 12:22 AM|
There's 8,000,142,234,755 threads about this! Don't be afraid, it's not some mad scientist thing. You're just melting some wax onto a flat surface, spreading it around, and then scraping it off.
The only way you could really hurt anything is be leaving the iron in one spot for too long (keep it moving ALWAYS) or having the iron too hot (smoke is a bad sign).
Otherwise, giv'er shit!
|11-23-2012 11:24 PM|
Beginner tuning board help!!
I am starting snowboarding this year and I have everything I need. I want to tune/wax my own board but don't know if I should attempt it with being a beginner. Ive been doing lots of research and videos about how to do it. I was going to try to hold out to either later this season or next year, but REI has the Dakine Deluxe Tune kit, which is everything I need except an iron for $36! Do you guys think I can and should start tuning my own gear?