|Topic Review (Newest First)|
|12-28-2012 08:10 PM|
|wrathfuldeity||there are different sized toe caps usually s/m/L...your's looks to be way too big...wrong size...go down 1 or maybe sizes. It also looks like your binding is the wrong size for the boot and perhaps you tried to compensate by getting a longer toe strap, idk....It all looks funky....take your boots/bindings with you to the shop.|
|12-28-2012 08:07 PM|
|Chef Jer||Toe and heel overhang should be equal. i.e. you should be centered on the board.|
|12-28-2012 07:50 PM|
Originally Posted by slyder View Post
|12-28-2012 06:56 PM|
Originally Posted by crystal View Post
Your toe straps are way too long. Adjust them 1 hole shorter (at least).
|12-28-2012 05:16 PM|
Check out the pic, he is bottoming out his ratchet.
and this one shows the strap at nearly the farthest hole out no wonder he's having issues
in addition with sz 11 boots I would expect some toe overhang there is none. Does that seem right, or now way to much heel over hang???
|12-28-2012 03:05 PM|
|john doe||Are your boots centered on your board? An 11 in the L/XL shouldn't have trouble fitting. Move the heel cup forward until the toe strap works right then mount the binding so your boot is centered.|
|12-28-2012 02:51 PM|
Originally Posted by kaka View Post
|12-28-2012 02:42 PM|
Ur front strap is in the most forward slot. I have Union contact pro's and a 11.5 boot, coulndt make it fit and feel right till i set the from strap in the back slot. Try reading the manual u got in the box If ur cranking down to the very end ur setup isnt correct.
Edit: and start with the heelcup setup like Kaka said ^^
|12-28-2012 02:20 PM|
Originally Posted by triumph.man View Post
I have the union atlas, large, size 10.5 vans boots, toe is rock solid, but you have to dial it in correctly from the start.
Adjust the heelcup accordingly, it should help. For instance, I have mine at "1" to center my boot, and it fits snug and I never have to worry about my bindings.
|12-28-2012 02:12 PM|
|triumph.man||your bindings look a bit big, if you're cranking them and using them to the last teeth|
|This thread has more than 10 replies. Click here to review the whole thread.|