|Topic Review (Newest First)|
|01-11-2013 10:57 PM|
Good show on adjusting yourself! Word of wisdom here, check the screws after a couple runs tomorrow. I mounted bindings about 9 days ago on my new board, using the same technique I've done for years, and one of the screws had worked itself loose. Only a half turn or so but if I hadn't checked it it could have become a problem! Even if you leave them in that stance for the life of the board, check your screws a couple times a season at least.
|01-11-2013 10:50 PM|
I must also say that I am pretty pleased that I remounted my bindings myself. My husband has done it all for me until now. But I did it myself tonight.
|01-11-2013 01:46 PM|
A good compromise between a full on symmetrical duck stance, and a forward stance would be something like -6 or your back foot, and +15 on your front. That stance should be great for the first year or so and then start adjusting from there. If you spend too much time adjusting stance while you're learning you may have trouble learning the basics.
|01-11-2013 01:35 PM|
Not a bad idea in theory to set them up at 0 and adjust from there. But in reality, starting at 0 with both would be tough. Especially in lessons.
Now I don't know if any of these dry land ways to determine stance angles are solid guidelines or exact science but I've seen them mentioned here before. A couple I remember are:
-Jump up from standing, or down from something a couple feet off the ground, and see where your feet are naturally when you land.
-As mentioned above, do a comfortable squat and see where that puts your feet.
One that I've done is walk around normally and relaxed then stop without really thinking about it. Look down at your feet.
Those might give you a better idea of where to start. Of course, you may have to tweak the angles a bit to get a lock on what feels right for you when riding in your stance width.
|01-11-2013 12:44 PM|
|01-11-2013 12:24 PM|
Well, this thread has made me feel a little silly. My bindings are set perfectly straight. I guess that would be 0? Both of them. On my first day out I had back leg at 0 and front leg at some crazy ass angle. My husband set it up for me. Then I figured that I would start at 0 with both and start adjusting from there. lol Think maybe this is why my last lesson went soooooo wrong? Oops.
Clearly I have no clue what I am doing. Kind of wishing the instructors would go over at least a little bit about what angle to stand at. My very first lesson the instructor asked me if I rode regular or goofy....as if I had a clue.
|01-11-2013 10:54 AM|
Originally Posted by Lamps View Post
|01-11-2013 10:34 AM|
I started +3/+18, every season I get a little closer to duck
|01-11-2013 10:21 AM|
Yeah sounds like you've got a directional board. You actually want a bit of setback (the nose is longer than the tail) when you're riding forward most of the time...
For stance angles there's many schools of thought. In general I think a DIFFERENCE of 18-27 degrees is a good starting point. So wanting to go to 18/-6 would put you right on the money at 24 degrees. I ride a -12/+12 but used to ride -9/+9... Back in the day I rode 0/+18 but it seems that nobody rides with a 0 deg back binding anymore! lol
|01-11-2013 03:30 AM|
yeah just move the bindings in closer together. I'd move both in rather than just try to move one binding or the other. Also, if you look at the mounting disks, you'll see that there are different holes you can mount in. So you don't have to jump to the next hole in the board, you can try mounting in the next hole in the binding. Just make adjustments until something is comfortable for you. One thing I did last year was jump down from 3 steps landing evenly on both feet. I figured the width of my feet landing would be a good starting point for mounting my bindings. I ended up going a little wider, but not much.
As far as binding angle, I think that's all just personal preference and body mechanics. I ride with my bindings set at 6/-6. I feel like this lets me get good pressure on the edges. Also, I've tried other angles and they just make my knees hurt. My friends think my angles are too tight and they ride at 12/-9 or 9/-9. Its really just works for you.
Honestly the best thing for you to do is just find a good starting point and carry a multi-tool with you the next time you go ride. Take some runs and make the adjustments you think you need.
Once you figure out what works for you, measure the distance (i like to go measure from the center of the binding) and note the angles. I can tell you off the top of my head that my bindings stance is 23 1/2" wide at 6/-6. I use this same stance on all of my boards, pow/park/all mountain. Its just the stance that works for me.
|This thread has more than 10 replies. Click here to review the whole thread.|