|Topic Review (Newest First)|
|02-25-2014 06:59 PM|
Reading the prior post sounds like you may have problems with the Capo.
I too have the Elan El Grande with the EX bindings. It is the Cadillac of boards. If you have ever ridden down the road in a older Caddy you will know what I mean. When I need to work the board pretty hard in moguls for example it takes a lot of work. My older Nitro Magnum was a little more nimble, but the Elan has a lot more stability and since I am more about going down the mountain then playing in the park this board fits me well.
|02-25-2014 06:43 PM|
I bought some Flow NX2-GT Snowboard Bindings and while I really liked them I only was able to slip into the binding about 50% of time and finally gave up on them. When it worked it was great, but when it did not it was rather frustrating. The straps and all were long enough, but I think just with the build of the chassis it did not work well with my larger Bigfoot boot. And not only was I not able to slip in them as I wanted, but when I did they were not very tight.
I picked up some last season Ride EX bindings XL at a cheap price and have been loving them. Was wanting to go with the Capo model, but could not pass up a deal at EVO.com.
I would say the Ride Ex bindings could probably fit a 17. I would just say it would be pushing it. I have more than enough strap to lock in and I don't think there should be any issue with the chassis, but would not guarantee anything. Also it is nice to have some extra strap when you are on the slope, it is cold and you are trying to get the strap started with gloves on. Guessing the Capo would be the same size and therefore should be the same story.
As long as the Ride bindings have durability over the long run it will be a great binding.
|02-25-2014 05:47 PM|
Originally Posted by Ucsbwsr View Post
The EX's are really shitty bindings, but from my extensive testing (took my boots into my local shop and tried stuffing them into every XL binding they had) the Ride EX's, LX's, and Rodeo's are the only bindings that will fit a size 16+ boot. The Rodeo's are a step up from the EX's from a quality standpoint, but they are a park binding, and way too flexy for the all mountain riding I do, while the LX's are complete piles of shit. So alas, the EX was literally my only option.
|02-25-2014 05:38 PM|
|baldylox||Do you per chance have a cabin in the Pacific Northwest? Maybe a love of fur coats?|
|02-25-2014 05:30 PM|
I rode the 2013 Capos for the last part of last season and the earlier part of this one and didn't have any problem with them fitting my size 15 boot (Burton). There was a bit of width to spare IIRC. However if your brand of boot runs wider than Burton then you might have a problem.
You will need longer straps though, at least on the toes because I basically had to max them out to wear them on over the toe cap of my boot. I think I had a half inch or a bit more to spare on the ankle strap though.
|02-25-2014 05:09 PM|
Any update to this? I would love to see some pictures as well. When I spoke to Ride they confirmed that they could send out some misc binding parts for free but they expressed concern with the width of a size 17 boot fitting in the infinity chassis.
I wear size 17 shoes and ordered size 17 boots (hoping they will pack out) and plan on running Capo bindings they look like a solid option and I am honestly not aware of other binding options for my size boot. Technine T9s are hard to come by and are getting fairly dated at this point.
Any input and advice is welcomed.
*big hand high-five*
|02-20-2013 05:59 PM|
Just had to jump in here real quick and say that I currently use Technine T9 Xl Snowboard Bindings. I have some EVO Bigfoot boots and love them. The bindings are great to. Seem to be sturdy and have held up to quite a bit of boarding. I did a quick search and it looks like they may no longer be made.
Not sure if this will post since I am new, but here is a link to a product page for them.
On Sale Technine T9 Xl Snowboard Bindings up to 70% off
|01-16-2013 01:21 PM|
I struggle through life with my tall handicap . I started out the season with a 2012 Ride Bezerker 168W, but at only 267mm at the waist, my toes hang off about two inches. It's not really a problem on blues, but going toe side on blacks laid me out 50% of the time due to my toes catching on the snow and lifting my edge off.
I put in an order for a 2013 Elan El Grande 171 (claimed to be the widest snowboard in the world with a 284mm waist) on Monday. Hopefully that will reduce enough toe drag to take on blacks without fear of catching my toes . It's supposed to arrive on Friday, so I will know after this weekend if it's any better. If not, I think I'm SOL.
|01-16-2013 12:44 PM|
|trapper||Yeah I wear a 15 boot (14 non-snowboard boot/shoe, my SB boots must run small as well) and a 164 wide board still leaves about an inch and a quarter overhang on each side. I can't imagine trying to deal with a size 17.|
|01-16-2013 11:05 AM|
I'd love to see some pictures of the binding setup.
Also, that is a massive foot. I imagine it impacts the number of boards you can ride?
|This thread has more than 10 replies. Click here to review the whole thread.|