Oakley Splice nose piece studs - Snowboarding Forum

York · 02-21-2011, 07:25 PM

Does anyone want the studs that go on each side of the nose from the Oakley Splice (this year's model)?

I have a pair of silver and a pair of blue ones.

Free of course, don't need em.

Let me know.

Shwank · 02-21-2011, 08:01 PM

They are removable? I was thinking about buying a pair of 2011 splices custom and they didn't fit the vibe

York · 02-21-2011, 10:25 PM

Yep!

Check this out: How to Take Apart Splices - Gear*Talk - Forums - Skiing's Online Community - Newschoolers.com

Scroll down about half way and it shows an example.

The piece was too hard to push out from the back with a bare finger, so if you take a flat screw driver and pry it out the front at the same time, it comes out relatively easily. Just try not to scratch the lens! Remove the lens first if you want to be sure.

JordanJ128 · 11-26-2012, 08:42 AM

Do you know if it is easy to put the little nose pieces back in the google. Like does it snap back in or does it need glue?

York · 11-26-2012, 09:51 AM

It just snaps back in with pressure.

02-21-2011, 07:25 PM	#1 (permalink)
York Member Join Date: Apr 2008 Posts: 79	Oakley Splice nose piece studs Does anyone want the studs that go on each side of the nose from the Oakley Splice (this year's model)? I have a pair of silver and a pair of blue ones. Free of course, don't need em. Let me know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-21-2011, 08:01 PM	#2 (permalink)
Shwank Member Join Date: Feb 2011 Location: Alaska Posts: 34	They are removable? I was thinking about buying a pair of 2011 splices custom and they didn't fit the vibe

02-21-2011, 10:25 PM	#3 (permalink)
York Member Join Date: Apr 2008 Posts: 79	Yep! Check this out: How to Take Apart Splices - Gear*Talk - Forums - Skiing's Online Community - Newschoolers.com Scroll down about half way and it shows an example. The piece was too hard to push out from the back with a bare finger, so if you take a flat screw driver and pry it out the front at the same time, it comes out relatively easily. Just try not to scratch the lens! Remove the lens first if you want to be sure.

11-26-2012, 08:42 AM	#4 (permalink)
JordanJ128 Junior Member Join Date: Oct 2012 Location: Denver Co Posts: 5	Do you know if it is easy to put the little nose pieces back in the google. Like does it snap back in or does it need glue?

11-26-2012, 09:51 AM	#5 (permalink)
York Member Join Date: Apr 2008 Posts: 79	It just snaps back in with pressure.