Snowboarding Forum - Snowboard Enthusiast Forums banner

Review: 2011 K2 Turbo Dream, 390 Boss, Restricted Hail

10K views 15 replies 8 participants last post by  dreampow 
#1 · (Edited)
Well, since I recently came back from a Tahoe trip, I think I can give my new setup a complete review. I reviewed the 2011 K2 Turbo Dream after a demo, but this one will be more comprehensive since it is my own setup and I got a chance to shred on some great conditions for three days. So let's get to it!

Here are my stats:

Weight: 185lbs
Boot Size: 9.5
Height: 5'9
Angles: 18/-12
Stance Width: 23.5"
Riding style: All-mountain freestyle
Experience: Advanced Intermediate - Advanced (noob in the park though)

2011 K2 Turbo Dream 156

K2 Turbo Dream Mens Snowboard 2011

Handling
What can I say about this board? It's fiendishly fast! It really did catch me off guard because the board I demoed wasn't as fast, but I equate that to poor demo board maintenance and ice coast conditions. I did not wax the board and rode it factory all three days. Edge to edge was superb. Transitioning from toe to heel felt natural and responsive even with my soft flexing boots. Out of turns, the board wasn't the snappiest, but it offered enough power and the torsional flex was solid so squirreliness(slang, I know) was non-existent. Speaking of squirrely, I can't praise K2's Harshmellow tech enough. It is a great piece of tech and not only does it dampen your landings, but also dampens the overall ride. Board chatter is an inherent fault in boards with rockers and Harshmellow is an excellent solution.

This board is not without its faults though. I did find a weakness. The first day out, conditions were hardpacked and icey. Obviously, being from Michigan, a black steep here is a blue steep in Tahoe. So what better than to bomb down some Tahoe steeps? Well, I ran into some ice patches. The TD didn't wash out, but it definitely struggled to hold its edge on the patches in a steep run. Going full speed and trying to edge on ice, I got the dreaded leg rocking scraping noises. Okay, so I'm being pretty dramatic. In reality, it wasn't enough to send me flying face/ass first, but this might not be the same case for some lesser experienced riders.

Pop
It's there... BurtonAvenger said it best in his review, it's enough to be satisfying. One thing though, my 390 Bosses definitely helped to juice as much pop as possible from this board. Mind you, I am a little spoiled by my main board, a 2007 Burton TWC. It's a posi camber with tons of pop.

Flex/Camber Profile
Definitely a mid-stiff board. Torsionally, it is stiff. Again, because of my bindings, I was able to flex the board nicely. The flex is absolutely perfect for all-mountain freestyle with a bias towards the all-mountain side. Buttering was fun, but that has more to do with the rocker profile on this board. The TD features K2's All-Terrain Rocker which sees their Flatline camber between the bindings (70%) and rocker through tip and tails (30%). The tip has a medium rise rocker while the tail has a low one. This shape was great in the powder. I took it into some deep stuff. I purposely rode it into the side of one of the runs which had waist deep snow. Literally speaking, the TD disappeared through knee deep and rode out. I ended up coming out with a mound of snow on my board, but nothing a little jump didn't fix. I guarantee that I would have got stuck if I was on my posi cambered board in the same situation. Otherwise, the TD stayed on top of the pow and the only time it sunk was when I stopped (was riding with slower wifey and sis so slowing down was aplenty).

Conclusions
Through and through, I am very satisfied with this board. It is very versatile with very few minor faults. I do however recommend this board for the strong intermediate to advanced rider. New riders will likely find this board to be too fast for their comfort. Not a big deal though. If anything, it'll make you learn faster :cheeky4:

2011 Rome 390 Boss L/XL

http://www.snowboards.net/snowboard...ntent=390Boss&utm_campaign=www.snowboards.net

These are sick, sick bindings. The color, the comfort, the flex, everything about it is superb. I'll get right to the cant system... awesome! I did make one mistake though, I didn't bring my other sets and went on my trip with the 3.5's installed. At first, with my 23" stance, I found discomfort. Since I didn't have the other cants handy, I decided to cowboy my stance more to 23.5". Ahhh, much better. Still some discomfort so I will be changing to 2.5's, but way better than what I experienced initially. I can totally see this cant system being super comfortable for really wide stance riders.

Comfort aside, the cant system had another benefit. I had more leverage over the flex of my board. The mid-stiff TD flexed more like a mid flex when I wanted it to. This means I was able to get the most pop out of my board. Back to comfort now... I am a huge fan of Flow bindings and my NXT-FSE's are the most comfortable bindings I have ever owned. With that said, the Bosses are the most comfortable traditional strap bindings I have ridden or owned. The ankle straps are super cushy and boot conforming. The toe strap isn't the best out there, but the waffle design does a really great job conforming to the toe of my boot. The ratchets were easy to release, but I did have a minor issue while tightening them. While I was cranking the ankle ratchets down, sometimes they would tilt past the release tab causing the strap to release. Simple solution, don't crank them down so fast or vigorously :)

The base of the bindings were nice and cushy. This coupled with the TD's Harshmellow and the Hail's sole made for some really damp riding. Did I mention that these bindings are super comfy?

One more negative to mention... I had a helluva time setting these bindings up. I had to adjust the heel cup setting to small to accommodate my 9.5 boots. That part was not fun at all. The screws for the highback setting are awkward and tough to untighten. Design could have been better because I have in fact seen a lot better. The cant settings are super easy though :)

Rome 390 Boss Update

Just an update for you guys. I took my Boss setup back out on very icey conditions this time. Yes, I picked up more chips and no, I don't give two poop logs.

However, I came across another issue. Some of the harder landings or take-offs were causing my rear foot's toe strap to come off as well as my leading foot's ankle strap. From the start I have stated that I don't like their release system and it is probably the reason why the ankle strap was coming off. As for the toe strap, the inner ladder just won't lock into place so it gets loose here and there.

In Rome's defense, nobody is immune to defects. I am not going to warranty it just yet because there is another factor that's probably contributing to my problems. I have the Burton Hails and it has their shrinkage tech. When I bought the boots, I didn't think it would actually perform as they advertise: Shrinkage reduced the overall footprint by a full size. So I did what I always do and got large bindings. I ended up having to adjust all the settings to the lowest possible and as a result, my straps are practically on the very last steps of the ladder.

Another thing I found that helped was giving the release tab a slap down after strapping in to make sure it was locked. By design, it is very loose and super easy to release.

I'm going to play around with the bindings some more and I'll let you guys know what's up.

I will add my boot review later on...
 
See less See more
#2 ·
Well, I ran into some ice patches. The TD didn't wash out, but it definitely struggled to hold its edge on the patches in a steep run. Going full speed and trying to edge on ice, I got the dreaded leg rocking scraping noises.
I've been interested in this board the last couple years, so I'm wondering what normally happens for you when you hit an unexpected ice patch? Also what board/s do you consider to hold an edge well on ice?

I took it into some deep stuff. I purposely rode it into the side of one of the runs which had waist deep snow. Literally speaking, the TD disappeared through knee deep and rode out. I ended up coming out with a mound of snow on my board, but nothing a little jump didn't fix.
Typically that's always on the side of any blue/green run on the best coast ;)
 
#3 · (Edited)
I've been interested in this board the last couple years, so I'm wondering what normally happens for you when you hit an unexpected ice patch? Also what board/s do you consider to hold an edge well on ice?
Well, my main board being a posi cambered directional, ice really has not posed a problem for me. The only problem I experience on ice with my main is edge transitioning. That just means I have to ride through the patch straight or skid turn my way through. Stability is a non issue though. The TD's main issue was lack of stability due to the lack of edge hold on ice. In it's defense however, I was out of my element. We rarely have good snow here. The terrain at the peak of Mt Rose the first day was a mixture of good snow and ice patches. So one second I'm riding fairly smooth snow then the next I'm hitting a patch.

As for boards that I consider to ride well on ice, I find magnetraction anything to handle really well. I also favor posi cambered boards that are mid-stiff to stiff. Ride's slimewalls are fairly good as well as Burton's frostbite edges with the latter being the better of the two.

I'm interested to see if K2 will come up with an answer to edge hold on ice in the future. Harshmellow does a great job on dampening, but ice still poses a slight problem. Like I said though, it wasn't enough of a problem to make me wash out. I did the first few times, but was able to easily compensate. I did so by making skidded turns so I wasn't on one edge too long.


Typically that's always on the side of any blue/green run on the best coast ;)
Yea, I was on a blue run when I did that. The couple of blacks I did at Diamond were still awesome, but the better riders/skiers pretty much ate up the entire terrain. On that blue I was on, only the middle was tracked so I had lots of fun doing side hits.
 
#5 ·
Awesome review, thanks!

I have the same problem with my rome targa inner ladders on on toe strap. It keeps coming off I don't know why. My solution is to zip-loc it into place. You could try some gangsta rubber bands to keep down the release possibly?

If this keeps popping up I will go to the shop and return them and get myself some Cartels.
 
#6 ·
I have also experienced the straps getting loose. I also have the hails and they are on the low settings. I think my problem is how I crank down on my latches. I generally reach around with a couple fingers on the release latch and crank the tighten latch with my thumb, stupidly not knowing this is raising the release latch. Putting some tension on the straps with my boots makes them pop out of the ladder slightly. Im coming from Ride RX bindings where the release latch was different. So, like you, I just had to get used to giving the the release latch a good slap down to make sure it was locked.
 
#7 ·
So it seems this is a fault in their ratchet design. It's a shame because these are simply the most awesome pair of traditional strap bindings in this flex range otherwise.

I hope they improved the design for the next model. I'll find out next month :D
 
#10 ·
I can't speak for the 2009 model, but since the 2010 model they have added Harshmellow. As for the all-terrain rocker, yes it is flat camber in the middle. It's 70% flat and 30% rocker with the tip having a medium rise and the tail having a low rise.

The Harshmellow made a pretty big difference in dampness. I'm a big fan of that tech :)

I don't get that leg rock when I land jumps (not that I do huge jumps though).
 
#12 ·
That reminds me, I never mentioned the weight of the TD. I don't know the exact weight nor did I ever put it on a scale, but by feel I can comfortably say I have ridden many lighter boards. It's not heavy by any means though. I'd place it in the average category.

But who knows how accurate my judgment is on that lol. I don't notice anyways when I'm riding. Just when I pick it up (before I mounted bindings).
 
#13 ·
Yes, I Demo'ed this board last year and found a new '10 on sale, I have also have a NS-SLR and like to ride this more, maybe it is the K2 Ever Bindings that are also my faves so so easy to get in and out of, Right now this is my favorite in my quiver, on ice well I ride CO so the little ice I hit I tend to just ride over and then make my turn. Not sure it would be my fave in the East, I LOVE it in the Pow and take into the side country as much as possible. It is fast and easy to ride if you are already confident intermediate rider, It, as all RC boards, force you to be more aware of your center of mass, you can turn on a dime but wash out on a dime too, great in trees and bumps, really so good all around. ANother vote for TD, never tried this years '11 harshmellow version and it sounds great!
 
#15 ·
I would definitely get the Large. You are going to find that you'll have to set everything to the smallest setting though. It'll definitely take some time to set your straps up correctly as well.

You will have to lace up your boots and strap on the bindings to adjust the straps to the correct size.

The main reason I went with the l/xl size is because I have another pair of size 10 boots that don't have the shrinkage tech. It's also better for me if I choose to get another pair of boots down the line that aren't as low profile as these.

Technically speaking though, you could fit in the m/l just fine on the highest setting.
 
#16 ·
I have a Japanese buddy who I taught to snowboard and is looking for a new stick this year.
He doesn't know much about boards and wants my help choosing. I am no expert, but I know a little.

He rides a skate banana 159 now. He is 160lbs 6ft tall and has size 9 boots. 2011 cartel bindings.

I would say he is an intermediate rider now. He mostly does freeride. A little play in the pow on the sides of the pistes and little jumps etc.
He doesn't do park or jib really so hes not getting the most out of the banana (recommended or should I say pushed on him by the dude in the shop he went to).

Still its been fine for him to learn on, but now he wants to carve a little more with a little more speed and stability and turn more dynamically. I have ridden his board and I personally find its no good when you get up to high speeds and want to carve hard. Guess thats not what its for. I am used to much stiffer free ride boards.

I plan to recommend the k2 TD 159. Guess he could do 156 but he does want some extra float.
We ride in mostly excellent conditions so I don't think the lack of grip on ice will be an issue.
We get lots of pow and even though he rides piste mostly it is packed light soft powder.

Would appreciate your input on this board and if you think its a good next step for him. Seems like it will raise the bar but not so much that its hard for him to adjust.

Thanks.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top