Reply

Old 01-28-2008, 10:51 PM   #1 (permalink)
Questhate
Junior Member
 
Join Date: Jan 2008
Posts: 3
Default Carving on tracked trails

This is my first season snowboarding. I'm carving fine when I'm going fast, but I can't seem to carve well at a moderate pace. When I'm at the height of my turn (board pointed the furthest away from straight downhill), the little bumps always make me lose my balance. Like when I'm turning heelside, it seems a slight bump will make my board skid out from underneath me and I end up falling on my ass. This doesn't happen on powder or freshly groomed trails, only near the end of the day when the runs are tracked up. At first I thought my board was just too short (I'm 5'8, 180lbs, on a 154), but I can deal with the jitters when going straight downhill. It's just when I'm carving at more moderate speeds that I'm running into this problem. Am I simply leaning too far backward when I'm hellside (and vice versa toeside). Should I stand up more straight? Any tips? Should I try a longer board?
Questhate is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 

Old 01-29-2008, 08:33 AM   #2 (permalink)
PaoloSmythe
Samyaksambuddhas
 
PaoloSmythe's Avatar
 
Join Date: Aug 2007
Location: I live in one of the world's biggest cities on a tiny island
Posts: 3,760
Default

your board might be a little too short but not much

you need (IMO) to bend your legs more to absorb these little bumps

and i do not think you are truly 'carving' (few people actually do)
__________________
Just coz you don't understand it
Doesn't mean it makes no sense!
PaoloSmythe is offline View My Blog!   Reply With Quote
Old 01-29-2008, 09:00 AM   #3 (permalink)
sedition
Senior Member
 
sedition's Avatar
 
Join Date: Feb 2007
Location: Boston, MA
Posts: 1,905
Default

Quote:
Originally Posted by PaoloSmythe View Post
you need (IMO) to bend your legs more to absorb these little bumps
Bingo.

If you watch someone who is good, they look very, very fluid. Their movements look effortless. Their knees are bent, and their hips, shoulders, and head almost never fluxuate in their height above the ground. Compare this with a newer rider. Their legs are straight. The look choppy when then turn or move. It looks like turning takes a good amount of effort, and they are also bobbing their entire body up and down.

Your knees act as shock exhorbers. If they are bent, you can absorb the bumps, without effecting the rest of your body (hence, your hips, head, shoulders, etc. stay level). If your legs are straight, you will feel that bump all the way up to your head, and your center of gravity can become unstable. When you see a bump coming, unweight your legs a bit. This can help the board just "float" over the bumps, with out as much of the vibration running through your entire body.
__________________
"Up front there ought to be a man in black." -Johnny Cash
Drink sin. Ride with the devil.

GEAR
Rome | Graft | 151
Johnnie Walker | Low-ball | Lodge
sedition is offline View My Blog!   Reply With Quote
Old 01-29-2008, 11:27 AM   #4 (permalink)
Snowolf
AASI Instructor
 
Snowolf's Avatar
 
Join Date: Aug 2007
Location: Mt. Hood Oregon
Posts: 4,552
Blog Entries: 4
Default

Quote:
Originally Posted by Questhate View Post
This is my first season snowboarding. I'm carving fine when I'm going fast, but I can't seem to carve well at a moderate pace. When I'm at the height of my turn (board pointed the furthest away from straight downhill), the little bumps always make me lose my balance. Like when I'm turning heelside, it seems a slight bump will make my board skid out from underneath me and I end up falling on my ass. This doesn't happen on powder or freshly groomed trails, only near the end of the day when the runs are tracked up. At first I thought my board was just too short (I'm 5'8, 180lbs, on a 154), but I can deal with the jitters when going straight downhill. It's just when I'm carving at more moderate speeds that I'm running into this problem. Am I simply leaning too far backward when I'm hellside (and vice versa toeside). Should I stand up more straight? Any tips? Should I try a longer board?
Does`nt sound like you are truly carving if the bumps are affecting you like this. The advantage of carving is that these bumps do not affect you since you are riding at a high edge angle. To maintain a good carve it takes speed and you may be going too slow and are actually skidding your turns. Either way, the secret to this indepentend flexion and extension to absorb these pumps with your legs.
__________________
Snowolf is offline View My Blog!   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



VerticalSports
Baseball Forum Golf Forum Boxing Forum Snowmobile Forum
Basketball Forum Soccer Forum MMA Forum PWC Forum
Football Forum Cricket Forum Wrestling Forum ATV Forum
Hockey Forum Volleyball Forum Paintball Forum Snowboarding Forum
Tennis Forum Rugby Forums Lacrosse Forum Skiing Forums
Copyright (C) Verticalscope Inc Search Engine Friendly URLs by vBSEO 3.0.0 RC8
vBCredits v1.4 Copyright ©2007, PixelFX Studios