Re: Spin Correction!! - Snowboarding Forum - Snowboard Enthusiast Forums
User Tag List

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 02-11-2013, 10:08 PM Thread Starter
Member
 
Join Date: Dec 2011
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Re: Spin Correction!!

Alrite i posted a couple weeks ago abou this an i tried working on it super hard and guess what i got worse!!
i cant even spin threes now even if it was all wrong. i try to do the right setup and stuff and my board is diffenitly straight on the jump when i jump( isnt in the vid below thou) i just feels like my edge gets locked into the jump and i cant spin anymore then a one example is the first spin in the vid! I want to make sure when i start spinning on bigger jumps that its correct!! Thanks so much for any help!!

i want to be able to spin them super slow and delayed! make em look steezy!!
also the last spin in teh vid is it correct? its for my friend!

note i was tryin to do a three in every shot


Petrus Productions-Get your Edit Fix On!!!
http://www.youtube.com/user/PetrusPr...?feature=watch

Mas Youtube Channel!! ^^^^^^
mcnutt is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 02-11-2013, 10:28 PM
Resident Snowman
 
aiidoneus's Avatar
 
Join Date: Apr 2011
Location: Alberta, Canada
Posts: 608
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
The first thing I noticed in the video is that as you start to rotate, your back hand tries to rotate in the opposite direction and seems to kill the spin. As you start the spin, try looking around behind you in the direction of the spin.

Last edited by aiidoneus; 02-11-2013 at 10:35 PM.
aiidoneus is offline  
post #3 of 15 (permalink) Old 02-11-2013, 11:54 PM
Senior Member
 
Soggysnow's Avatar
 
Join Date: Sep 2012
Location: Whistler
Posts: 176
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
You almost look a little stiff going into it, not enough speed and bending too much at the waist when you land which will make your board slide out from underneath you. Try keeping that land absorption in your knees.
We all make similar mistakes when learning, myself included :-)
Have you tried spinning in the other direction? Sometimes I find that if you do that a few times then go back to the side you want to work on, that it helps.

I ride: NS Pandora 149 + Salomon Absolute premium Bindings
Stepchild PMS 149/ Smokin Fawesym 149 + Nitro Eris Bindings +15 -12

K2 Contour 5.
Soggysnow is offline  
post #4 of 15 (permalink) Old 02-13-2013, 02:27 AM
Jed
Veteran Member
 
Jed's Avatar
 
Join Date: May 2011
Location: Whistler, BC
Posts: 813
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Problem is you aren't carving. You're on an edge, but not carving into the jump.

But, that tiny jump you're trying to 360 off is so small and you can't go fast enough to carve, so I honestly can't tell which is causing the lack of carve.

The main thing with spinning properly is there's a big difference between carving and what I saw in your attempts, which is riding on an edge off the jump with next to no carve to help the rotation, here's a blog I did with diagrams of what I mean: The Secret To An Effortless 360 Rotation - The Perfect Carve Line

One other thing about your style, keep your hands down when you rotate.

Right now you'll notice that in every rotation you're swinging your hands up in the air and that's wrecking your style on spins.

As far as the last spin goes, it looked closer to correct, although I can't fully tell from the angle whether he's carving properly or not. However, he definitely needs to keep his hands down and grab... that spin was very wild and unstylish with the hands everywhere.

I teach snowboarding via step-by-step videos lessons at Snomie.com - How To Snowboard Videos, Snowboard Tips & Snowboard Lessons

Last edited by Jed; 02-13-2013 at 02:32 AM.
Jed is offline  
post #5 of 15 (permalink) Old 02-13-2013, 02:37 AM
Veteran Member
 
Banjo's Avatar
 
Join Date: Jan 2013
Location: Calgary, AB
Posts: 726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Quote:
Originally Posted by Jed View Post
Problem is you aren't carving. You're on an edge, but not carving into the jump.

But, that tiny jump you're trying to 360 off is so small and you can't go fast enough to carve, so I honestly can't tell which is causing the lack of carve.

The main thing with spinning properly is there's a big difference between carving and what I saw in your attempts, which is riding on an edge off the jump with next to no carve to help the rotation, here's a blog I did with diagrams of what I mean: The Secret To An Effortless 360 Rotation - The Perfect Carve Line

One other thing about your style, keep your hands down when you rotate.

Right now you'll notice that in every rotation you're swinging your hands up in the air and that's wrecking your style on spins.

As far as the last spin goes, it looked closer to correct, although I can't fully tell from the angle whether he's carving properly or not. However, he definitely needs to keep his hands down and grab... that spin was very wild and unstylish with the hands everywhere.
Jed FTW. Read that link, more carve less flail.
Banjo is offline  
post #6 of 15 (permalink) Old 02-13-2013, 08:21 AM
-LIFETIME MEMBER-
 
Extremo's Avatar
 
Join Date: Nov 2008
Location: NH
Posts: 3,571
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by Banjo View Post
Jed FTW. Read that link, more carve less flail.
Yeah, carve more. Wind up, hold it until the jump and release it into the carve. Come from further outside the jump on your in run. It's all about momentum.
Extremo is offline  
post #7 of 15 (permalink) Old 02-13-2013, 08:22 AM Thread Starter
Member
 
Join Date: Dec 2011
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by Jed View Post
Problem is you aren't carving. You're on an edge, but not carving into the jump.

But, that tiny jump you're trying to 360 off is so small and you can't go fast enough to carve, so I honestly can't tell which is causing the lack of carve.

The main thing with spinning properly is there's a big difference between carving and what I saw in your attempts, which is riding on an edge off the jump with next to no carve to help the rotation, here's a blog I did with diagrams of what I mean: The Secret To An Effortless 360 Rotation - The Perfect Carve Line

One other thing about your style, keep your hands down when you rotate.

Right now you'll notice that in every rotation you're swinging your hands up in the air and that's wrecking your style on spins.

As far as the last spin goes, it looked closer to correct, although I can't fully tell from the angle whether he's carving properly or not. However, he definitely needs to keep his hands down and grab... that spin was very wild and unstylish with the hands everywhere.
The article defeinlty helps!! i was thinking that the jump was a wee bit too small cant wait to try this out at my hill this weekend!

Petrus Productions-Get your Edit Fix On!!!
http://www.youtube.com/user/PetrusPr...?feature=watch

Mas Youtube Channel!! ^^^^^^
mcnutt is offline  
post #8 of 15 (permalink) Old 02-13-2013, 11:12 AM
Senior Member
 
Soggysnow's Avatar
 
Join Date: Sep 2012
Location: Whistler
Posts: 176
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Good Link Jed, found another helpful one by yourself :-)
The Snowboard Jumping Mistake That Every Beginner Makes

OP have you ever seen the hourglass shape painted onto some large jumps? Sometimes you can see them on Catskinner chair on Blackcomb.
I have been trying to find a pic to put up with no luck(when I find a visual, I will add)
Anyhow have you noticed the shape and where it crosses over? Its a pretty good image to have in your head, as to when to set up your carve for the spin. Carve too early and you will be flying off to the side as your board will naturally start turning.

Haha edit- I looked at the link I found before looking at the one Jed posted...soooo I guess we are on the same page.

I ride: NS Pandora 149 + Salomon Absolute premium Bindings
Stepchild PMS 149/ Smokin Fawesym 149 + Nitro Eris Bindings +15 -12

K2 Contour 5.

Last edited by Soggysnow; 02-13-2013 at 11:35 AM.
Soggysnow is offline  
post #9 of 15 (permalink) Old 02-13-2013, 12:02 PM
Senior Member
 
Clarion's Avatar
 
Join Date: Jan 2011
Location: Toronto, Ontario
Posts: 136
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Quote:
Originally Posted by Soggysnow View Post
Good Link Jed, found another helpful one by yourself :-)
The Snowboard Jumping Mistake That Every Beginner Makes
I wish I had known this a couple weeks ago.

I ride East coast and the only jumps I do are over the lips on a run or small natural features.

I went to Whistler for the first time and on one of the days I mustered up the courage to try doing small jumps in the beginner Habitat Terrain park for the entire day. I must say the small upward feeling on a jump takes a bit of getting used to.

I found myself doing 3 or 4 speed checks before the jump and as a result the landing was not smooth or I would outright fall. I learned to start lower and do no speed checks and had better landings with straight air jumps.

The following is a little off-topic...
By midday I started getting confident and pushed my drop in much higher with no speed checks. Jed, to get perspective, in Habitat Terrain the 2nd and 3rd jumps are back to back and people usually wait in line at the top of the lip for those 2 jumps. I started my drop from the lip and decided to go through both jumps with no speed checks. After the first jump I landed too close to the second. I had a choice to bail to the side or go through with it because there was no time for speed check and stabilize before the jump. I chose wrong. Over the next jump I went but landed close to the flat area that leads to the following very wide flat box. That landing jarred my legs, tried to absorb as much as I could, crumbled onto my butt and bounced/slid across the box on my back. I heard the people laughing, another yelling that was fantastic and another yelling if I was alright. Came out of that with my goggles over my chin, a small cut on my tongue and crushed banana goo in my pocket.

How do you progress from small jumps to medium jumps? In the park they look drastically different and much higher?

Last edited by Clarion; 02-13-2013 at 12:05 PM.
Clarion is offline  
post #10 of 15 (permalink) Old 02-13-2013, 12:31 PM
Senior Member
 
Soggysnow's Avatar
 
Join Date: Sep 2012
Location: Whistler
Posts: 176
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Clarion to be fair, the smalls on Whistler are pretty inconsistent. The first one has a steep drop off the next two are smooth but too close together, I always seem to have to skip the second and hit the box instead (shame really).
The one after the little rollers, you come from around the corner on a cat track and usually have to stop to check no one else is there (people are cutting in from the rollers above), thus cutting all your speed on an already flat take off. The next set are good and then the last one has a steeper drop again.

I actually prefer to hike the Terrain Garden on BC as it is consistent all the way through, and I can focus on perfecting tricks rather than battling the flow of the small Whis park which takes more time to figure out.

I ride: NS Pandora 149 + Salomon Absolute premium Bindings
Stepchild PMS 149/ Smokin Fawesym 149 + Nitro Eris Bindings +15 -12

K2 Contour 5.

Last edited by Soggysnow; 02-13-2013 at 12:48 PM.
Soggysnow is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowboarding Forum - Snowboard Enthusiast Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
Powered by vBadvanced CMPS v3.2.3
For the best viewing experience please update your browser to Google Chrome