Snowboarding Forum - Snowboard Enthusiast Forums banner
edge
1-16 of 16 Results
  1. Boards
    I'll get straight to it, I've always had my gear tuned by shops, without any regard for what bevels/angles they put on my gear. But now I'm going to tryy to start maintaining (at least the side bevel) myself. I have the TOKO edge tuner pro, the file, and 400/600 grit diamond stones as well. I...
  2. Boards
    Hello all! So I've had the Rossi One Mag for about a season, and maintained the board every 2 trips (basically every 2 weeks). I did waxing as well as light edge tuning but without checking with Rossi, was doing a 0 degree edge. I just reached out to them and found out that the factory does a...
  3. Boards
    Original Snowboarding Forum Post: Missing Edge Repair So I didn't buy a new board on Black Friday but instead I fixed my old one. Many people on this website told me to get a new one and that my favorite board was junk. I couldn't let her die so easy plus I need to save up if I wanna get a...
  4. Boards
    At the end of last season I did damage to my board in the glades. The damage was done beneath the toe of my rear binding (I ride regular). You can see in the pictures that a piece of edge is missing (about 3-5 inches long) as well as about half nickle into the board of base removed. I have...
  5. Tips, Tricks And Snowboard Coaching
    Hi everyone, I'm new to any sort of board maintenance but not afraid to start. My board, as you can see in the pictures, needs some repair. I've tried looking online and it looks like my first instincts for the de-laminated part were right, just some epoxy and clamps should do fine. As for the...
  6. Boards
    I bent my edge on my snowboard and could use some tips on how to fix and seal it. I already hammered it back into place as much as I could.
  7. Boards
    Hey, I just wanted to see if this chip on the top edge of my board requires a repair. This is my first board I've owned and whilst I'm not bothered about cosmetic damage; I just want to ensure its nothing more serious. Thanks in advance :D
  8. Boards
    So yesterday while driving down the road I came across someone throwing away their old Burton Seven board. It is the 155cm from 2006. There was some base damage which I easily patched up with a bit of p-tex, and in addition there was a piece of the edge missing. I have already invested 23...
  9. Boards
    I have a a question about board specs , what do the numbers mean for effective edge ? Ex I have a 2011 gnu carbon credit and the effective edge is 119mm trying to figure out what it means ...my I just ordered a Lib. Tech T Rice pro 155cm and has the same effective edge being a 1cm difference...
  10. Boards
    Anything to worry about? Ridden once.
  11. Boards
    I noticed a little crack today in the tail of my Ride Fleetwood board :( It's not very long (yet) but I'm afraid it could get longer :unsure: It's on the top laminate layer of the board and extends a few millimeters in. I want to repair it since I've heard cracks like this can let water into...
  12. Boards
    Hey guys, Tuning newbie here. I have a pretty new Burton Custom Flying-V. I took it out once so far, but it was pretty rocky and my edge got a lot of burs. I picked up a Dakine side edge filer, since conditions are still pretty icy in Tahoe and I wanted to keep the edges nice and sharp...
  13. Tips, Tricks And Snowboard Coaching
    Hello! I'm new to these forums and also to boarding, so far I've gone up to the mountain once and I seemed to pick it up quite fast,I was doing the more difficult blue squares on my first day! Woo! The only major problem I'm having is when I go down some of the steeper runs and riding my toe...
  14. Boards
    OKay so I have had my eyes one the 2014 billy goat. Thing is I don't like this tucked in edge bull crap. A fully wrapped edge seems a lot more sturdy. Although my K2 is fairly dinged up. I have a sale coming up this weekend and I want to know opinions. BG? or another board similar for and all...
  15. Boards
    I have come to the realization that my all-mountain board can't hold an edge. It makes me an unstable rider, and I'm not quite sure what to do about it. I am riding a '09/10 GNU B-Pro. Now, I know that is old but I first noticed this the second season I had it, when I switched boards with a...
  16. Boards
    Hey guys. I have some question regarding maintenance of my board. Back in April I bought a board from Blank Snowboards ( great brand, boards come in white or black, can customize them. They give tutorials. Go check them out, seriously awesome brand) and I have recently discovered rust. It...
1-16 of 16 Results
Top